169 posts categorized "Monday's 3D Challenge"

08/28/2012

Bright Blossom Note or Mini Postcard

Morning everyone!


I hope you all had a great weekend!  Sunday was dh's and mine wedding anniversary. He is on vacation this week and we are working like crazy to get projects done here and at my parents farm. We got my parents new front door installed and started to work on the old garage's roof so we spent good quality time together yesterday. lol We found out on Friday that finally after almost two years of fighting with work comp that he has been approved to have his 3rd knee surgery. So were trying to get as much stuff done as we can this week along with jobs thrown in there too. So I hope to post every day this week but depends how the day goes. lol

Today I am sharing a mini note or postcard that I created. I wanted to have a little thank you note on hand but didn't want it to be just blah post-it note so I came up with this. It uses the Bright Blossoms Stamp Set and the Summer Smooches Designer Series Paper. I love these two products not sure why as I am not a bright colored person but they are so yummy together! Along with the project I have a video tutorial for you today!

Stampin' Up! Supplies Used

Bright Blossoms Clear Stamp Set item #113439
Fabulous Phrases Clear Stamp Set item #120501
Big Shot item #113439
Argyle Embossing Folder item #127750
2 1/2" Circle Punch item #120906
Curly Label Punch item #119851
Itty Bitty Shapes Punch Pack item #118309
Summer Smooches Designer Series Paper item #125409
Bitty Buttons item #118761
Rhinestones Basic Jewels item #119246
White Baker's Twine item #124262
1/4 Stitched Pacific Point Ribbon it em #126878

Shop online for Stampin’ Up! Supplies 24-7 Click HERE!!!!!!

 

IMG_9718

Directions~

1. Cut 1 3 ½” x 3 ½” piece of Pacific Point card stock.

2. Cut 1 3 ¼” x 3 ¼” piece of Whisper White card stock.

3. Cut 1 3” x 3” piece of Tangerine Tango card stock. Run the card stock through the Big Shot with the Argyle Embossing Folder. Glue the pieces of card stock together.

4. Punch 1 piece of Whisper White card stock out with the 2 ½” Circle Punch. Take the stamps from Bright Blossoms Stamp Set and ink them in Lucky Limeade, Real Red then stamp them onto the Whisper White circle. Glue the Whisper White circle to the Tangerine Tango card stock.

5. Cut 1 ½” x 3 ½ ” piece of Summer Smooches Designer Series Paper (Red Dots) notch out the end then glue across the bottom of the Tangerine Tango card stock.

6. Cut 1 ½” x 3 ¼” piece of Summer Smooches Designer Series Paper (Yellow Pattern) notch out the end then glue across the Whisper White circle and other piece of Summer Smooches Designer Series Paper (Red Dots).

7. Take the stamp from Fabulous Phrases Stamp Set; ink it in Tangerine Tango and stamp onto a piece of Whisper White card stock. Then use part of the Curly Label Punch to punch it out. Glue it over lapping the Whisper White circle and Summer Smooches Designer Series Paper.

8. Cut 2 ¾” of ¼ Pacific Point Stitched Grosgrain Ribbon. Notch out the one end and attach across the bottom with Glue Dots. Using the Itty Bitty Shapes Punch Pack;  punch out a piece of Summer Smooches Designer Series Paper (Tangerine Tango) then attach it to a Bitty Button. Attach it to the card stock with a Glue Dot. Then add a White Baker’s Twine Bow to the button. Place 2 Jewels Basic Rhinestones to the circles.

Video Tutorial~


 Supplies Used~
Stamps~ Bright Blossoms, Fabulous Phrases
Ink~ Real Red, Lucky Limeade, Tangerine Tango
Paper~ Pacific Point, Tangerine Tango, Whisper White, Summer Smooches Designer Series Paper
Acc.~ Big Shot, Argyle Folder, 2 ½” Circle Punch, Curly Label Punch, Itty Bitty Shapes Punch Pack, Rhinestone Basic Jewels, White Baker’s Twine, ¼ Pacific Point Ribbon, White Baker’s Twine, Bitty Buttons

Thanks for stopping  by! Have a great day!

Signature


 

 

05/28/2012

Monday's 3D Challenge; Fruit and Flowers Gift Card Holder

Morning everyone!

Happy Memorial Day!! Sorry I have been missing we've been pretty busy here. We have been working 15+ hour days and then had family here and some from out of State along with a few graduations too. I haven't had a lot of computer or crafting time! Thanks for the emails of concern were ok just a little worn out. lol

Today I am sharing a fun little gift card holder idea!! It uses the Berry Blossom Designer Series Paper that is on the retired list! If you haven't yet purchased this designer series paper then HURRY before it is gone!!! A lot of the Retired Accessories are already gone too so be sure to HURRY and order what you want because once it's gone its gone!!! Love this Berry Blossom Designer Series Paper and Fruit & Flower Set!! This is one of the sets that was featured in my Summer Fun On-line Class. The class is over but you can still purchase it to get all the fabulous ideas!!

View the RETIRED STAMP LIST HERE.

View the RETIRED ACCESSORY LIST HERE.

Shop online for Stampin' Up! Supplies 24-7 Click HERE!!!!!!

I created this for Stampin' Addicts Monday 3D Challenge. If you never been check it out, it is geared towards Stampin' Up! if your a demo be sure to sign up for the demo forums and then give a shout out to me catrules!! Remember you can use it for any time of the year simple change it out to fit your needs!!

Stampin' Up! Supplies Used

Fruit and Flowers Clear Stamp Set item #122607
Family Reunion Clear Stamp Set item #122712
Big Shot item #113439
Scallop Square Die item #115950
Square Lattice Embossing Folder item #119976
Berry Blossom Designer Paper item #122350
Calypso Coral Baker's Twine item #125573
Jewels Basic Rhinestones item #119246

Shop online for Stampin' Up! Supplies 24-7 Click HERE!!!!!!

IMG_6728

Directions~

1.  Using the Big Shot and Scallop Square Die; die cut 1 Scallop Square out of Wisteria Wonder card stock.

2. Cut 1 Basic Black card stock 4" x 8" score at 4". Fold on the scored line to create like a card and attach to the scallop Square.

3. Cut 1 Lucky Limeade card stock 3 3/4" x 3 3/4". Run it through the Big Shot with the Square Lattice Embossing Folder.


4. Cut 1 Berry Blossom Designer Series Paper 1" x 3 3/4". Glue to the left side of the Lucky Limeade card stock.

5. Cut 1 Whisper White card stock 3" x 3". Take the stamp from Fruit & Flowers Stamp Set; ink in Lucky Limeade card stock and stamp along the left and bottom edge. Take the stamp from Family Reunion Stamp Set; ink it in Basic Black and stamp onto the Whisper White card stock in the upper right hand corner. Glue the Whisper White card stock to the Lucky Limeade card stock then wrap some Calypso Coral Baker's Twine around the bottom. Glue the Lucky Limeade card stock to the front of the Basic Black card stock. Take the stamps from Fruit & Flowers Stamp Set and ink them in Wisteria Wonder and Calypso Coral. Stamp onto Whisper White card stock and cut each flower out. Then attach with Stampin' Dimensionals and add some Jewels Basic Rhinestones the front.
 

IMG_6736

Inside~

6. Cut 1 Lucky Limeade card stock 3 3/4" x 3 3/4". Glue to the Basic Black card stock on the inside.


7. Cut 1 Basic Black card stock 1" x 4". Apply Liquid Glue only on the ends and across the bottom edge attach to the Lucky Limeade card stock. This then creates a pocket.

8. Cut 1 Berry Blossom Designer Series Paper 1/2" x 4". Glue to the Basic Black card stock.

Video Tutorial~

  

 

Supplies Used~
Stamps~ Fruit & Flowers, Family Reunion
Ink~ Wisteria Wonder, Calypso Coral, Basic Black
Paper~ Wisteria Wonder, Lucky Limeade, Basic Black, Whisper White, Berry Blossom Designer Series Paper
Acc.~ Big Shot, Scallop Square Die, Square Lattice Embossing Folder, Calypso Coral Baker's Twine, Jewels Basic Rhinestones

Thanks for stopping by! Have a great day!!

05/21/2012

Monday's 3D Challenge; The Open Sea Book Mark

Morning :)

Sorry I've been missing! We've been pretty busy here this past week. My dad was gone on a fishing trip with family so I was a little more busier than normal with my parents farm. Of course those of you that have farms know when the owner leaves everything that can go wrong does. Yep your probably laughing with me...right. lol so I was gone a lot!

Today I am sharing a fun little book mark idea!! Another cute idea for "manly idea"! It uses the Well Worn Designer Series Paper that is on the retired list! If you haven't yet purchased this designer series paper then HURRY before it is gone!!! A lot of the Retired Accessories are already gone too so be sure to HURRY and order what you want because once it's gone its gone!!!

View the RETIRED STAMP LIST HERE.

View the RETIRED ACCESSORY LIST HERE.

Shop online for Stampin' Up! Supplies 24-7 Click HERE!!!!!!

I created this for Stampin' Addicts Monday 3D Challenge. If you never been check it out, it is geared towards Stampin' Up! if your a demo be sure to sign up for the demo forums and then give a shout out to me catrules!! I thought this would be a fun idea for Father's Day or you could use it for any time of the year simple change it out to fit your needs!!

Stampin' Up! Supplies Used

The Open Sea Clear Stamp Set item #123032
Many Marvelous Markers item #119806
2 3/8 Scallop Circle Punch item #118874
1 3/4" Circle Punch item #119850
Well Worn Designer Series Paper item #122359
Neutrals Brads item #119736
3/8 Not Quite Navy Taffeta Ribbon item #122918
Linen Thread item #104199
Sponge Daubers item #102892
Mat Pack item #105826
Paper-Piercing Tool item #116631

Shop online for Stampin' Up! Supplies 24-7 Click HERE!!!!!!

IMG_6642

Directions~

1. Cut 1 piece of River Rock card stock 1 1/2" x 5 1/2". Take the stamp from The Open Sea Stamp Set; ink it in River Rock and stamp onto the River Rock card stock. Sponge the edges with River Rock ink.
2. Cut 1 piece of Well Worn Designer Series Paper 1" x 3". Notch out one end of the Designer Series Paper and glue to the River Rock card stock towards the bottom.
3. Cut 7 3/4" of 3/8 Not Quite Navy Taffeta Ribbon. Notch out one end of the 3/8 Not Quite Navy Taffeta Ribbon. Place a glue dot on one end and attach to the Well Worn Designer Series Paper. Create a loop at the top and place 1 Neutrals Brad in through the ribbon.
3. Punch out 1 piece of Early Espresso card stock with the 2 3/8 Scallop Circle Punch. Use the Mat Pack and Paper-Piercing Tool to pierce holes in each scallop. Wrap some Linen Thread between each scallop. Attach to the book mark with Stampin' Dimensionals.
4. Take the stamp from The Open Sea Stamp Set; ink it in Not Quite Navy and stamp onto a piece of River Rock card stock. Punch out the stamped image with the 1 3/4" Circle Punch. Sponge the edges with River Rock ink. Attach to the Early Espresso Scallop Circle with Stampin' Dimensionals.

Video Tutorial~
 


Supplies Used~
Stamps~ The Open Sea
Ink~ River Rock, Not Quite Navy
Paper~ River Rock, Early Espresso, Well Worn Designer Series Paper
Acc.~ 2 3/8 Scallop Circle Punch, 1 3/4" Circle Punch, 3/8 Not Quite Navy Taffeta Ribbon, Linen Thread, Neutrals Brads, Mat Pack, Paper-Piercing Tool, Stampin' Dimensionals, Glue Dots

Thanks for stopping by! Have a great day!

05/14/2012

Monday's 3D Challenge; Now You're Cookin' Note Pad

Morning peeps!

Today I am sharing a fun little note pad idea!! Another cute idea for Father's Day! It uses the Now You're Cookin Stamp Set that is on the retired list! If you haven't yet purchase this set then HURRY before it is gone!!! A lot of the Retired Accessories are already gone too so be sure to HURRY and order what you want because once it's gone its gone!!!

View the RETIRED STAMP LIST HERE.

View the RETIRED ACCESSORY LIST HERE.

Shop online for Stampin' Up! Supplies 24-7 Click HERE!!!!!!


I created this for Stampin' Addicts Monday 3D Challenge. If you never been check it out, it is geared towards Stampin' Up! if your a demo be sure to sign up for the demo forums and then give a shout out to me catrules!! I thought this would be a fun idea for Father's Day or you could use it for any time of the year simple change it out to fit your needs!!

Stampin' Up! Supplies Used

Now You're Cookin Clear Stamp Set item #121327
Family Reunion Clear Stamp Set item #122712
Big Shot item #113439
Scallop Rectangle Clearits item #118872
Domestic Goddess Designer Series Paper item #122355
Large Oval Punch item #119855
Metallic Brads item #119741
Calypso Coral Bakers Twine item #125573
Sponge Daubers item #102892
Mat Pack item #105826
Paper-Piercing Tool item #116631

Shop online for Stampin' Up! Supplies 24-7 Click HERE!!!!!!

IMG_6704

Directions~

1. Cut 1 piece of Crumb Cake card stock 4 1/4" x 5 1/2". Score it at 3/4" and 1".

2. Cut 1 piece of Poppy Parade card stock 1/2" x 4". Take the stamp Now You're Cookin'; ink it in Poppy Parade and stamp all over the Poppy Parade card stock. Sponge the edges with Poppy Parade ink. Glue the Poppy Parade card stock to the Crumb Cake card stock.

3. Cut some Copy Paper 4" x 4 1/4". Use the stamp Now You're Cookin'; ink it in Poppy Parade and stamp onto the Copy Paper. Place the Copy Paper onto the Crumb Cake card stock. Fold over the Crumb Cake card stock at the top then set two Metallic Brads on each end.

4. Use the Big Shot and the Scallop Rectangle Clearits Die to die cut out a piece of Domestic Goddess Designer Series Paper. Sponge the edges with Crumb Cake ink. Take the stamp from Family Reunion Stamp Set; ink it in Pool Party and stamp it onto a piece of Whisper White card stock. Punch it out with the Large Oval Punch. Sponge the edges with Crumb Cake ink. Glue it to the Domestic Goddess Designer Series Paper. Take the stamp Now You're Cookin'. Ink it in Poppy Parade and stamp onto a piece of Whisper White card stock. Ink it in Crumb Cake and stamp onto Whisper White card stock. Then cut both images out and attach to the Domestic Goddess Designer Series Paper. Wrap some Calypso Coral Baker's Twine around.

Tutorial Video

  

 

Supplies Used~
Stamps~ Now You're Cookin', Family Reunion
Ink~ Poppy Parade, Pool Party, Crumb Cake
Paper~ Crumb Cake, Whisper White, Poppy Parade, Domestic Goddess Designer Series Paper
Acc.~ Big Shot, Scallop Rectangle Clearits Die, Large Oval Punch, Calypso Coral Baker's Twine, Metallic Brads, Sponge Daubers, Stampin' Dimensionals

Thanks for stopping by! Have a great day!

Signature


04/30/2012

Mondays 3D Challenge; Tiny Tea Cup Purse

Morning peeps!

Today I am sharing a fun little purse idea!! It uses the Tiny Tea Cup Stamp Set that is on the retired list! If you haven't yet purchase this set then HURRY before it is gone!!! A lot of the Retired Accessories are already gone too so be sure to HURRY and order what you want because once it's gone its gone!!!

View the RETIRED STAMP LIST HERE.

View the RETIRED ACCESSORY LIST HERE.

Shop online for Stampin' Up! Supplies 24-7 Click HERE!!!!!!


I created this for Stampin' Addicts Monday 3D Challenge. If you never been check it out, it is geared towards Stampin' Up! if your a demo be sure to sign up for the demo forums and then give a shout out to me catrules!! I thought this would be a fun idea for a favor for a Mother/Daughters Tea or you can put something else inside it. You could use it for any time of the year simple change it out to fit your needs!!

Stampin' Up! Supplies Used

Tiny Tea Cup Stamp item #118086
Big Shot item #113439
Perfect Details Texture Plate item #115962
Curly Label Punch item #119851
1 1/4" Square Punch item #119865
Small Oval Punch item #120908

3/16 Corner Punch item #119871
Pool Party Baker's Twine item #125574

Jewels Basic Rhinestones item #119246

Shop online for Stampin' Up! Supplies 24-7 Click HERE!!!!!!

IMG_5715

Directions~

1. Cut 1 piece of Whisper White card stock 3" x 6 3/4". Place it vertically onto the Simply Scored and score a 1/2" in on the two sides. Place the card stock horizontally and score it at 3 1/4" and 3 1/2". Use the 3/16 Corner Punch to round all four corners. This is the base part of the purse.

2. Cut 2 piece of Whisper White card stock 1/4" x 6". These are the handles then attach to the front and back.

3. Cut 1 piece of Basic Black card stock 2 3/4" x 3". Run through the Big Shot with the Perfect Details Texture Plate.

4. Cut 1 piece of Whisper White card stock 2 1/4" x 2 1/2". Glue to the card stock from Step 3.

5. Cut 1 piece of Poppy Parade card stock 2" x 2 1/4". Use the Curly Label Punch to partly punch a piece out in Pool Party. Then use the Mat Pack and Paper-Piercing Tool to pierce holes in the Curly Label. Glue to the back of the Poppy Parade card stock and attach to the other pieces of card stock. Take the stamp Tiny Tea Cup; ink it in Daffodil Delight and stamp onto a piece of Whisper White card stock. Then punch it out with the 1 1/4 Square Punch. Glue it to the Poppy Parade card stock. Wrap some Pool Party Baker's Twine around the layers of card stock. Take the stamp from Tiny Tea Cup; ink it in Basic Black and stamp onto a piece of Whisper White card stock. Punch it out with the small oval punch. Use the Mat Pack and Paper-piercing Tool to pierce holes across the bottom. Attach with Stampin' Dimensionals then add some Jewels Basic Rhinestones to the Poppy Parade card stock.

6. Cut 2 piece of Whisper White card stock 3/4" x 1 3/4". Score the card stock at 1/4 and 1/2". Fold on the scored lines apply some liquid glue to the tabs and attach to the inside of the purse on the sides.This creates the side piece so what you put inside doesn't fall out.

Video Tutorial~

  

Supplies Used~
Stamp~ Tiny Tea Cup
Ink~ Basic Black, Daffodil Delight
Paper~ Whisper White, Basic Black, Poppy Parade, Pool Party
Acc.~ Big Shot, Perfect Details Texture Plate, Curly Label Punch, 1 1/4 Square Punch, Small Oval Punch, Pool Party Baker's Twine, Mat Pack, Paper-piercing Tool, Jewels Basic Pearls, Stampin' Dimensionals, Multipurpose Liquid Glue.

Thanks for stopping by! I hope you enjoyed today's project and tutorial!

Signature


04/23/2012

Mondays 3D Challenge; Mixed Bunch Smarties Wrapper

Morning peeps!

Today I am sharing a fun candy wrapper I made using the Mixed Bunch Stamp Set from the Occasions Mini!! I created this for Stampin' Addicts Monday 3D Challenge. If you never been check it out, it is geared towards Stampin' Up! if your a demo be sure to sign up for the demo forums and then give a shout out to me catrules!! This can be easily changed out to fit anyone or any time of the year!!

Stampin' Up! Supplies Used

Mixed Bunch Clear Stamp Set item #125537
Teeny Tiny Wishes Stamp Set item #115370

Blossom Punch item #125603
Decorative Label Punch item #120907
3/4" Circle Punch item #119873
Twitterpated Designer Series Paper item #125406
1/2 Baja Breeze Seam Binding item #122331
Jewels Basic Rhinestones item #119246

Shop online for Stampin' Up! Supplies 24-7 Click HERE!!!!!!

IMG_5240

Directions~

1. Cut 1 piece of Whisper White card stock 2” x 8 ½”. Score at 4” and 4 ½”. Take the stamp from Mixed Bunch Stamp Set; ink it in Blushing Bride and stamp all over the Whisper White card stock. Place candy onto card stock and fold around. Secure closed with Sticky Strip.

2. Cut 1 piece of Twitterpated Designer Series Paper 1” x 4”. Glue to the center of the Whisper White card stock.

3. Cut 1 piece of Twitterpated Designer Series Paper ½” x 4 ½”. Notch out one of the ends of the DSP and then glue to center of Twitterpated Designer Series Paper in Step 2.

4. Punch a decorative label out in Blushing Bride using the Decorative Label Punch. Cut in half and attach on the left side. Punch out a piece of Basic Gray card stock with the Blossom Punch. Add some ½ Baja Breeze Seam binding onto the back of the flower and attach with Stampin’ Dimensionals. Take the stamp from Mixed Bunch Stamp Set; ink it in Blushing Bride and stamp onto a piece of Whisper White card stock and then cut out the image. Attach to the Gray flower. Take the stamp from Mixed Bunch Stamp Set; ink it in Pear Pizzazz and stamp it onto the Whisper White card stock and punch it out with the ¾” Circle Punch and glue to the center of the flower. Take the stamp from Teeny Tiny Wishes Stamp Set; ink it in Baja Breeze and stamp onto a piece of Whisper White card stock and cut into a banner. Place a Stampin’ Dimenensional onto the back and attach across the center of the flower. Then added one Jewels Basic Rhinestone to the decorative Blushing Bride label.

Video Tutorial~

  

Stamps~ Mixed Bunch, Teeny Tiny Wishes
Ink~ Blushing Bride, Pear Pizzazz, Baja Breeze
Paper~ Whisper White, Basic Gray, Blushing Bride, Twitterpated Designer Series Paper
Acc.~ Fancy Flower Punch, Decorative Label Punch, Decorative Label Punch, ½ Baja Breeze Seam Binding, Jewels Basic Rhinestones

Thanks for stopping by! Have a great Monday!

Signature

04/09/2012

Monday's 3D Challenge; Funky Four Gift Card Holder

Morning peeps!

Today I am sharing the Gift Card from Stampin' Addicts Blog Bouncing! I created this for Stampin' Addicts Monday 3D Challenge. If you never been check it out, it is geared towards Stampin' Up! if your a demo be sure to sign up for the demo forums and then give a shout out to me catrules!! This can be easily changed out to fit anyone or any time of the year.

Stampin' Up! Supplies Used

Funky Four Clear Stamp Set item #120438
Family Reunion Clear Stamp Set item #122712
Big Shot item #113439
Perfect Details Texturz Plate item #115962
Cheerful Treat Designer Series Paper item #122381
Decorative Label Punch item #120907
Large Oval Punch item #119855
1/4 Pretty Pink Grosgrain Ribbon item #109032
Jewels Basic Rhinestones item #119246

Shop online for Stampin' Up! Supplies 24-7 Click HERE!!!!!!

IMG_4822

Directions~

Gift Card Holder~

1. Cut 1 piece of Whisper White card stock 3 1/2" x 7 1/2". Place the card stock horizontal onto the Simply Scored and score at 3 3/4". Place the card stock vertically onto the Simply Scored and score 1" in on one side.

2. Cut 1 piece of Pink Pirouette card stock 2 1/4" x 3 1/2". Run it through the Big Shot with the Perfect Details Texturz Plate. Glue the card stock to the Whisper White card stock.

3. Cut 1 piece of Pear Pizzazz card stock 1 3/4" x 3 1/4". Glue the card stock to the Pink Pirouette.

4. Cut 1 piece of Cheerful Treat Designer Series Paper 1" x 3 1/2". Glue to the bottom of the Pear Pizzazz card stock.

5. Cut 1 piece of Whisper White card stock 1 3/4" x 3". Take the stamp from Funky Four Stamp Set; ink it in Pear Pizzazz and stamp all over the Whisper White card stock. Glue to the Pear Pizzazz card stock. Wrap a piece of 1/4 Pretty in Pink Grosgrain Ribbon around the holder. Punch a piece of Pink Pirouette card stock out with the Decorative Label Punch. Run the card stock through the Big Shot with the Perfect Details Texturz Plate. Punch a piece of Pear Pizzazz card stock out with the Large Oval Punch. Take the stamp from Family Reunion Stamp Set; ink it in Melon Mambo and stamp onto a piece of Whisper White card stock. Cut it into a banner and attach with Stampin' Dimensionals. Add some Jewels Basic Rhinestones to the oval.

IMG_4921

Inside Directions~

1. Cut 2 pieces of Cheerful Treat Designer Series Paper 1/2" x 3 3/4". Glue the DSP to the front of the pockets.

2. Cut 1 piece of Whisper White card stock 2" x 3". Take the stamp from Funky Four Stamp Set; ink it in Pear Pizzazz and stamp on the left side.

3. Cut 1 piece of Cheerful Treat Designer Series Paper 1/2" x 2". Glue on the left side of the Whisper White card stock. Punch a piece of Pink Pirouette card stock using the Curly Label Punch. Glue to the back of the Whisper White card stock then add some Jewels Basic Rhinestones to the label. Then slide into the pocket.

Video Tutorial~

 

Supplies Used~
Stamps~ Funky Four, Family Reunion
Ink~ Pear Pizzazz, Melon Mambo
Paper~ Whisper White, Pear Pizzazz, Pink Pirouette, Cheerful Treat DSP
Acc.~ Big Shot, Perfect Details Texturz Plate, Decorative Label Punch, Large Oval Punch, Curly Label Punch, 1/4 Pretty in Pink Grosgrain Ribbon, Jewels Basic Rhinestones, Stampin' Dimensionals

Thanks for stopping in! Have a great day!

Signature

04/02/2012

Monday's 3D Challenge; Bunny Holder

Morning everyone!

Today I am sharing a holder I made for Easter. I know I said I was going to share the gift card holder today but I didn't realize that this coming weekend is Easter I for some reason thought I had another week. Yikes!! So I didn't want to share this after Easter! lol Sorry I promise the Gift Holder will be up next Monday! I created this for Stampin' Addicts Monday 3D Challenge. If you never been check it out, it is geared towards Stampin' Up! if your a demo be sure to sign up for the demo forums and then give a shout out to me catrules!! I got the Easter Bunnies at Walmart. I made a bunch of these for the cousin's kids this year!

Stampin' Up! Supplies Used

Flight of the Butterfly item #111564
Letter It item #122842
Big Shot item #113439
Backgrounds 1 Texturz Plate item #114512
1/2 Concord Crush Stitched-Poly Ribbon item #119266
Jewels Basic Rhinestones item #119246

Shop online for Stampin' Up! Supplies 24-7 Click HERE!!!!!!

IMG_4831

I didn't want to give the kids a box so I decided to decorate it by making a holder for it to slide in. Plus they LOVE when I decorate they think it's pretty cool. lol It is a little snug because of the size of the box but it will slide into the holder.

Directions~
Note~ I recommend watching the video to understand the scoring and cutting part.

1. Cut 1 piece of Tempting Turquoise card stock 4" x 12". Place the card stock vertical onto your Simply Scored and score 1" in on one side only. Place the card stock horizontaly onto the Simply Scored and score at the following 4 3/4", 5 3/4", 10 1/2", and 11 1/2". Cut on the scored lines to create tabs for the bottom up to the 1" line. Apply Sticky Strip to the tabs and side and fold together to create a box.

2. Cut 1 piece of Chocolate Chip card stock 3 1/4" x 4 1/2". Glue it to the front of the Tempting Turquoise card stock.

3. Cut 1 piece of Whisper White card stock 3" x 4". Run it through the Big Shot with the Backgrounds 1 Texturz Plate.Glue to the Chocolate Chip card stock.

Take the stamps from Letter It Stamp Set; ink them in Tempting Turquoise and stamp onto Whisper White card stock. You want to spell Easter out; then cut each letter out. Place them across the Whisper White card stock with Stampin' Dimensionals overlapping each letter. Cut a piece of 1/2 Concord Crush Stitched-Poly Ribbon and wrap it around the bottom of the box. Create a bow from the 1/2 Concord Crush Stitched-Poly Ribbon and attach it to the front of the box. Take the stamp from Flight of the Butterfly Stamp Set; ink it in Daffodil Delight and stamp onto a piece of Whisper White card stock. Take the second image from the Flight of the Butterfly Stamp Set; ink it in Chocolate Chip and stamp on top of the previous image. Cut out the butterfly and attach to the center of the bow. Then added a Jewels Basic Rhinestone to the center of the butterfly.

Video Tutorial~

 

Supplies Used~
Stamps~ Flight of the Butterfly, Letter It
Ink~ Daffodil Delight, Chocolate Chip, Tempting Turquoise
Paper~ Tempting Turquoise, Whisper White, Chocolate Chip
Acc.~ Big Shot, Backgrounds 1 Texturz Plate, 1/2 Stitched-Poly Ribbon, Jewels Basic Rhinestones, Stampin' Dimensionals, Glue Dots

Thanks for stopping in! Have a great day!

Signature

03/26/2012

Monday's 3D Challenge; Scallop Square Post-it Note Holder

Morning everyone!

It's monday so it's time for Monday's 3D Challenge!! I created a fun little post-it note holder using the Big Shot and the Scallop Square Die!  I created this for Stampin' Addicts Monday 3D Challenge. If you never been check it out, it is geared towards Stampin' Up! if your a demo be sure to sign up for the demo forums and then give a shout out to me catrules!! This project is supper simple and fun to make simply change it out to fit your needs.

Stampin' Up! Supplies Used

Best Friends Forever Clear Stamp Set item #122807
Occasions Alphabet Clear Stamp Set item #123598
Big Shot item #113439
Scallop Square Die item #115950
1/4 Garden Green Grosgrain Ribbon item #124321
Wisteria Wonder Baker's Twine item #125576
Large Tag Punch item #119876
Itty Bitty Shapes Punch Pack item #118309
1/16 Hand Punch item #101277
Jewels Basic Rhinestones item #119246

Shop online for Stampin' Up! Supplies 24-7 Click HERE!!!!!!
 

  IMG_4804

Directions~

1.  Using the Big Shot and Scallop Square Die; die cut out one scallop square in Wild Wasabi. Take the stamp from Best Friends Stamp Set; ink it in Wild Wasabi and stamp all over the Wild Wasabi square. Use the 1/16 Hand Held Punch and punch holes in each scallop.

2. Cut 1 piece of Perfect Plum card stock 3 1/3” x 3 ½”. Glue the Perfect Plum card stock to the scallop square.

3. Glue the Post-it Note to the Perfect Plum card stock.  Cut some ¼ Garden Green Grosgrain Ribbon to wrap around the scallop Square and Post-it Note. Take the stamp from Occasions Alphabet Stamp Set; ink it in Wild Wasabi and stamp onto a piece of Very Vanilla card stock then punch it out with the Large Tag Punch. At the top punch a hole with the 1/16 Hand Held Punch; then tie some Wisteria Wonder Bakers Twine through. Use the Itty Bitty Punch Pack to punch flowers out in So Saffron and Perfect Plum. Then place Jewels Basic Rhinestones in the centers of the flowers and attach to the tag and Baker’s Twine.

Video Tutorial~

 

Stamps~ Best Friends Forever, Occasions Alphabet
Ink~ Wild Wasabi
Paper~ Wild Wasabi, Perfect Plum, So Saffron, Very Vanilla
Acc.~ Big Shot, Scallop Square Die, ¼ Garden Green Grosgrain Ribbon, Wisteria Wonder Bakers Twine, Itty Bitty Shapes Punch Pack, Large Tag,  1/16 Hand Held Punch, Jewels Basic Rhinestones

Thanks for stopping by have a great day!

Signature

03/19/2012

Monday's 3D Challenge; Label Purse using Mixed Bunch

Morning everyone!

It's monday so it's time for Monday's 3D Challenge!! I created a fun little mini purse! I was inspired by many different ones I saw made using the Framelit Dies Label Collection. I created this for Stampin' Addicts Monday 3D Challenge. If you never been check it out, it is geared towards Stampin' Up! if your a demo be sure to sign up for the demo forums and then give a shout out to me catrules!!

Stampin' Up! Supplies Used

Mixed Bunch Clear Stamp Set item #125537
Big Shot item #113439
Framelits Dies Labels Collection item #125598
Elegant Lines Embossing Folder item #119277
Twitterpated Designer Series Paper item #125406
Blossom Punch item #125603
Scallop Trim Border Punch item #118402
Neutrals Designer Buttons item #119743
3/8 Whisper White Taffeta Ribbon item #109070
3/8 Blushing Bride Pleated Satin Ribbon item #125570
Large Pearls Jewels Basic item #125577
Jewels Basic Pearls item #119247

Shop online for Stampin' Up! Supplies 24-7 Click HERE!!!!!!

  IMG_4688

Directions~

1. Using the Big Shot and the Framelits Dies Labels Collection (2nd largest label) die cut 2 in Tempting Turquoise. Cut at the first scallop for a flat edge on both pieces. Then run through the Big Shot with the Elegant Lines Embossing Folder.

2. Cut 1 piece of Tempting Turquoise card stock 5" x 6 1/2". Place the card stock vertical onto the Simply Scored and score 1" in on the two sides. Place the card stock horizontal onto the Simply Scored and score at 2 3/4" and 3 3/4". Cut the tabs on the score lines and fold the box up.

3. Cut 1 piece of Crumb Cake card stock 2" x 5". Take the stamp from Mixed Bunch Stamp Set; ink it in Crumb Cake and stamp onto a piece of Crumb Cake card stock. Glue the Crumb Cake card stock to one of the labels across the center.

4. Cut 1 piece of Pear Pizzazz card stock 1/2" x 5". Punch one side out with the Scallop Trim Border Punch. Glue towards the top of the Crumb Cake card stock.

5. Cut 1 piece of Twitterpated Designer Series Paper 1" x 5". Glue it to the Crumb Cake card stock over lapping the Pear Pizzazz card stock. Time the edge of the card stock to go with the label design.

6. Cut 5 1/4" of 3/8 Whisper White Taffeta Ribbon. Place Glue Dots on each end of the ribbon and attach over the Twitterpated Designer Series Paper. Then attach the labels to the front and back of the box.

7. Cut 7" of 3/8 Blushing Bride Pleated Satin Ribbon. Place Glue Dots on the ends and attach to the inside of the box.

Punch a piece of So Saffron card stock with the Blossom Punch. Take the stamp from Mixed Bunch Stamp Set; ink it in Blushing Bride and stamp onto a piece of Whisper White card stock. Cut out the image. Place Stampin' Dimensionals onto the back of each flower and attach to the front of the purse. Added a Designer Button Neutrals to the center of the flower then add a Large Jewels Pearl to the center of the button. Then added some Jewels Basic Pearls to the Pear Pizzazz card stock.

Video Tutorial~

  

Supplies Used~
Stamps~ Mixed Bunch
Ink~ Blushing Bride, Crumb Cake
Paper~ Tempting Turquoise, So Saffron, Blushing Bride, Pear Pizzazz, Whisper White, Twitterpated Designer Series Paper
Acc.~ Big Shot, Framelits Dies Labels Collection, Elegant Lines Embossing Folder, Scallop Trim Border Punch, Blossom Punch, 3/8 Whisper White Taffeta Ribbon, 3/8 Blushing Bride Pleated Satin Ribbon, Neutrals Designer Buttons, Large Pearls Jewels Basic, Basic Jewels Pearls, Sticky Strip, Glue Dots, Stampin' Dimensionals

Thanks for stopping by! Have a great day!

Signature


Order Online

ETGVQDCT
Holly's Clubs

Hostess Clubs


Rubber Redneck
Paper Pumpkin Club


Catalogs
Specials
Etsy Store
Projects

web page visitor statistics

Site by: Pravus Media