Rubber Redneck

Monday's 3D Challenge Pocket Gift Card Holder using Charming

Morning everyone!

I didn't get this posted yesterday. I had a dentist appointment right away in the morning. I was there for almost 3 hours. I didn't feel so good and got a monster headache. So today I am sharing Monday's 3D Challenge.

Thank you for all who left comments the last few days on my blog! Ok I know you all wanna know who won the Card Folder along with the cards.....the winner is Beth Weinstein!!! Congrats!!! Thank you again for all your wonderful comments!

Today's share is a 3D Challenge I posted over on Stampin' Addicts website! If you never been check it out, it is geared towards Stampin' Up! if your a demo be sure to sign up for the demo forums and then give a shout out to me catrules! The challenge was to make a Pocket Gift Card Holder! This is really simple and easy to make. It makes a great gift for anyone! I used the following to create mine~

Charming item #116519
1/8 Daffodil Delight Taffeta Ribbon item #119254
Scallop Edge Border Punch item #119860
1 3/8 Circle Punch item #119860
1 1/4 Circle Punch item # 119861
3/4 Circle Punch item #119873
Vintage Brads item #109109
DSP Newsprint item #117166
Sponge Daubers item #102892

If you would like to purchase the supplies I used to make this project or place an order HERE, email or call me too!! Just click on the Shop Now button when on my Stampin' Up! Website

Directions~

1. Cut 1 piece of Crumb Cake card stock 3 1/4" x 6". On the 6" length score it at 2" this will form a pocket when you fold on the scored line. I used the stamp from the Charming Set inked it in Crumb Cake and stamped around the edges. I then sponged Crumb Cake ink around the edges.

2. Cut 1 piece of Basic Black card stock 1 3/4" x 3".

3. Cut 1 piece of DSP Newsprint 1 1/2" x 2 3/4". I took the stamps again and stamped in Crumb Cake and the butterfly in Daffodil Delight. Using a Sponge Dauber I sponged the edges with Crumb Cake. I then wrapped 1 /8 Daffodil Delight taffeta ribbon around the bottom. In the upper left hand corner I added 2 Vintage Brads. I then snailed it to the front of the pocket.

4. Cut 2 pieces of Daffodil Delight card stock 1 1/4" x 3 1/4". Use the Scallop Edge Punch and punch one side on both pieces. Using the Mat Pack and Paper-Piercing Tool I punched holes in each scallop. I then sponged Daffodil Delight ink around the edges. I attached one border to the top and the other to the top of the pocket. I then snailed the two sides shut. To finish it off I stamped the imagae in Basic Black on Very Vanilla card stock and punched it out with the 1 1/4" Circle Punch. I stamped the image again in Daffodil Delight on Very Vanilla card stock and punched it out with the 3/4 Circle Punch. Both pieces I sponged Crumb Cake ink around the edges. I then punched out a piece of Daffodil Delight with the 1 3/8" Circle Punch. I added dimensionals between them and then placed a Vintage Brad in the center.

Tutorial Video coming!!

Supplies Used~
Stamp Set~Charming
Ink~Crumb Cake, Daffodil Delight, Basic Black
Paper~Crumb Cake, Daffodil Delight, Basic Black, Very Vanilla, DSP Newsprint
Acc.~ Scallop Edge Punch, 1 3/8, 1 1 /4, 3/4" Circle Punches, 1/8 Daffodil Delight Taffeta Ribbon, Vintage Brads, Mat Pack, Paper-Piercing Tool, Sponge Daubers.

Thanks for stopping in and have a great day!

Holly

Eastern Bloom 4 and Blog Candy Give away!!

Happy Sat. everyone!

Today is the final card that I created for the Card Folder! I am also giving away one of the Card Folders along with the cards to one lucky person! I'll leave it up now through Sunday. Just leave a comment! On Tue. I will announce the lucky winner!! I used the following to create this card~

Eastern Blooms Stamp Set item #111626
Sanded Background Stamp Set item #109294
Teeny Tiny Wishes Stamp Set item #115370
Big Shot item #113439
Texture Plate SU Perfect Details item #115962
Crimper item #101618
Curly Label Punch item #112208
Scallop Edge Punch item #112091
1/8 Very Vanilla Taffeta Ribbon item #119960
Vintage Brads item #109109
5/16 Neutral Brads item #112533

If you would like to purchase the supplies I used to make this project or place an order HERE, email or call me too!! Just click on the Shop Now button when on my Stampin' Up! Website

The base is Crumb Cake card stock, I took the stamp from Eastern Blooms and stamped around the edges with Crumb Cake ink. I then cut a piece of Wild Wasbi and I ran the card stock through my Big Shot along with the Texture Plate Perfect Details then sponged the edges with Wild Wasbi ink. I cut a piece of Marina Mist, I used the Scallop Edge Punch on the bottom, then stamped the flower randomly all over using the Marina Mist ink. I then sponged the edges with Marina Mist ink. Using the Paper-Piercing Tool I punched holes in each scallop.

I cut a piece of Bravo Burgundy card stock, I then ran it through the Crimper. Next I cut a piece of Pink Pirouette card stock. I stamped the flower image randomly in Pink Pirouette ink and sponged the edges also. Then I cut a piece of Very Vanilla card stock. I stamped the edges with a flower in Wild Wasbi ink. Then went back and stamped little flowers in Pink Pirouette and Crumb cake. I took the Sanded Background stamp inked it in Crumb Cake ink and stamped over all of it. I sponged the edges in Crumb Cake ink. I added a Vintage Brads on the right. Using the 1/8 Very Vanilla Taffeta Ribbon I criss crossed it on the bottom.

I stamped the flowers in Pink Pirouette, Bravo Burgundy, and Crumb Cake on Very Vanilla card stock. I then cut them out popped the up on Stampin' Dimesonals.The Crumb Cake one I placed in the center of the 1/8 Taffeta Ribbon. I then took the saying from Teeny Tiny Wishes, inked it in Marina Mist, stamped on Very Vanilla card stock and punched it out with the Curly Label Punch. I lightly stamped the flower in Pink Pirouette ink, I sponged Crumb Cake around the edges and placed it off to the right.

Here is a complete picture of the group that I am giving away!!! Just leave a comment!

Supplies Used~
Stamp Set~ Eastern Blooms, Teeny Tiny Wishes, Sanded Background.
Ink~Wild Wasbi, Marina Mist, Pink Pirouette, Bravo Burgundy, Crumb Cake
Paper~Very Vanilla, Wild Wasbi, Marnia Mist, Pink Pirouette, Bravo Burgundy Crumb Cake
Acc.~ Big Shot, Texture Plate Perfect Details, Crimper, Curly Label Punch, Scallop Edge Punch, Linen Thread, 1/8 Very Vanilla Taffeta Ribbon, Whisper White Taffeta Ribbon, Vintage Brads, 5/16 Neutral Brads

Thanks for stopping by have a great Monday!

Holly

Eastern Bloom 3

It's Friday!! Woo Hoo!!!

My day to sleep in and I woke a 5:30 am to a major down pour! Wow was it raining! It was bad enough my dog wanted no part of going outside. lol

Today I am sharing the 3rd card for the Card Folder! Be sure to come back tomorrow for the last card and the Blog Candy give away! I used the following to create this card~

Eastern Blooms Stamp Set item #111626
Sanded Background Stamp Set item #109294
Teeny Tiny Wishes Stamp Set item #115370
Big Shot item #113439
Texture Plate SU Perfect Details item #115962
Crimper item #101618
Curly Label Punch item #112208
Scallop Edge Punch item #112091
1/8 Very Vanilla Taffeta Ribbon item #119960
Vintage Brads item #109109
5/16 Neutral Brads item #112533

If you would like to purchase the supplies I used to make this project or place an order HERE, email or call me too!! Just click on the Shop Now button when on my Stampin' Up! Website

The base is Crumb Cake card stock, I took the stamp from Eastern Blooms and stamped around the edges with Crumb Cake ink. I then cut a piece of Wild Wasbi and I ran the card stock through my Big Shot along with the Texture Plate Perfect Details then sponged the edges with Wild Wasbi ink. I cut a piece of Marina Mist, I used the Scallop Edge Punch on the bottom, then stamped the flower randomly all over using the Marina Mist ink. I then sponged the edges with Marina Mist ink. Using the Paper-Piercing Tool I punched holes in each scallop. I wrapped 1/8 Very Vanilla Taffeta Ribbon around the Marina Mist in the center. I added a bow and a flower cut out stamped in Crumb Cake.

I cut a piece of Bravo Burgundy card stock, I then ran it through the Crimper. Next I cut a piece of Pink Pirouette card stock. I stamped the flower image randomly in Pink Pirouette ink and sponged the edges also. Then I cut a piece of Very Vanilla card stock. I stamped the edges with a flower in Wild Wasbi ink. Then went back and stamped little flowers in Pink Pirouette and Crumb cake. I took the Sanded Background stamp inked it in Crumb Cake ink and stamped over all of it. I sponged the edges in Crumb Cake ink. I added a Vintage Brad on the left. I stamped the flowers in Pink Pirouette, Bravo Burgundy, and Marina Mist on Very Vanilla card stock. I then cut them out popped the up on Stampin' Dimesonals. I then took the saying from Teeny Tiny Wishes, inked it in Bravo Burgundy stamped on Very Vanilla card stock and punched it out with the Curly Label Punch. I sponged Crumb Cake around the edges and placed it off to the left.

Supplies Used~
Stamp Set~ Eastern Blooms, Teeny Tiny Wishes, Sanded Background.
Ink~Wild Wasbi, Marina Mist, Pink Pirouette, Bravo Burgundy, Crumb Cake
Paper~Very Vanilla, Wild Wasbi, Marnia Mist, Pink Pirouette, Bravo Burgundy Crumb Cake
Acc.~ Big Shot, Texture Plate Perfect Details, Crimper, Curly Label Punch, Scallop Edge Punch, 1/8 Very Vanilla Taffeta Ribbon, Vintage Brads, 5/16 Neutral Brads

Thanks for stopping by have a great Monday!

Holly

Eastern Bloom 2

Morning everyone :)

I wanted to take the time and thank everyone that has been leaving comments on my projects thank you all! I appreciate them a lot! Be sure to check back on Sat. I will be offering Blog Candy again as a thank you to all of my readers!!!

Yesterday was a crazy day, I started the day off by over sleeping. Whoops also was not the day to do that. Had some cleaning jobs and other appointments so I never got time to get on and post.

So today I am sharing card 2 from the Card Folder. I used the following to create this~

Eastern Blooms Stamp Set item #111626
Sanded Background Stamp Set item #109294
Teeny Tiny Wishes Stamp Set item #115370
Big Shot item #113439
Texture Plate SU Perfect Details item #115962
Crimper item #101618
Curly Label Punch item #112208
Scallop Edge Punch item #112091
Linen Thread item #104199
1/8 Very Vanilla Taffeta Ribbon item #119960
Vintage Brads item #109109
5/16 Neutral Brads item #112533
Whisper White Taffeta Ribbon item #109070

If you would like to purchase the supplies I used to make this project or place an order HERE, email or call me too!! Just click on the Shop Now button when on my Stampin' Up! Website

My base is Crumb Cake card stock. I cut my card stock 4 1/4" x 11 then scored it at 5 1/4" so I would have a shorter end. I took the stamp from Eastern Blooms and stamped around the edges with Crumb Cake ink. I cut a piece of Marina Mist, I used the Scallop Edge Punch on the bottom, then stamped the flower randomly all over using the Marina Mist ink. I then sponged the edges with Marina Mist ink. Using the Paper-Piercing Tool I punched holes in each scallop. Then attached it to the bottom of the Crumb Cake.

I then cut a piece of Wild Wasbi and I ran the card stock through my Big Shot along with the Texture Plate Perfect Details then sponged the edges with Wild Wasbi ink.
I cut a piece of Bravo Burgundy card stock, I then ran it through the Crimper. Next I cut a piece of Pink Pirouette card stock. I stamped the flower image randomly in Pink Pirouette ink and sponged the edges also. Then I cut a piece of Very Vanilla card stock. I stamped the edges with a flower in Wild Wasbi ink. Then went back and stamped little flowers in Pink Pirouette and Crumb Cake. I took the Sanded Background stamp inked it in Crumb Cake ink and stamped over all of it. I added 2 Vintage Brads on the left. I sponged the edges in Crumb Cake ink.

I stamped the flowers in Pink Pirouette, Bravo Burgundy, and Marina Mist on Very Vanilla card stock. I cut them out popped the up on Stampin' Dimensionals. On the bottom I took some 1/8 Very Vanilla Taffeta ribbon and wrapped around the bottom. Finishing it off with a flower I cut out. I then took the saying from Teeny Tiny Wishes, inked it in Marina Mist stamped on Very Vanilla card stock and punched it out with the Curly Label Punch. I sponged Crumb Cake around the edges.

Supplies Used~
Stamp Set~ Eastern Blooms, Teeny Tiny Wishes, Sanded Background.
Ink~Wild Wasbi, Marina Mist, Pink Pirouette, Bravo Burgundy, Crumb Cake
Paper~Very Vanilla, Wild Wasbi, Marnia Mist, Pink Pirouette, Bravo Burgundy Crumb Cake
Acc.~ Big Shot, Texture Plate Perfect Details, Crimper, Curly Label Punch, Scallop Edge Punch, Linen Thread, 1/8 Very Vanilla Taffeta Ribbon, Whisper White Taffeta Ribbon, Vintage Brads, 5/16 Neutral Brads

Thanks for stopping by have a great Monday!

Holly

Part of the Card Folder using Eastern Blooms

Morning everyone!

I posted the Tutorial Video for yesterday's Monday 3D Challenge too!

I finally managed to finish up one of the cards I made to go with the Card Folder that I created last week for the 3D Monday Challenge. I have a total of 4 different ones started but not finished.lol So today I am sharing one of them with you all :) I used the following to create this~

Eastern Blooms Stamp Set item #111626
Sanded Background Stamp Set item #109294
Teeny Tiny Wishes Stamp Set item #115370
Big Shot item #113439
Texture Plate SU Perfect Details item #115962
Crimper item #101618
Curly Label Punch item #112208
Scallop Edge Punch item #112091
Linen Thread item #104199
1/8 Very Vanilla Taffeta Ribbon item #119960
Vintage Brads item #109109
5/16 Neutral Brads item #112533
Whisper White Taffeta Ribbon item #109070

If you would like to purchase the supplies I used to make this project or place an order HERE, email or call me too!! Just click on the Shop Now button when on my Stampin' Up! Website

The base is Crumb Cake card stock, I took the stamp from Eastern Blooms and stamped around the edges with Crumb Cake ink. I then cut a piece of Wild Wasbi and I ran the card stock through my Big Shot along with the Texture Plate Perfect Details then sponged the edges with Wild Wasbi ink. I cut a piece of Marina Mist, I used the Scallop Edge Punch on the bottom, then stamped the flower randomly all over using the Marina Mist ink. I then sponged the edges with Marina Mist ink. Using the Paper-Piercing Tool I punched holes in each scallop.

I cut a piece of Bravo Burgundy card stock, I then ran it through the Crimper. Next I cut a piece of Pink Pirouette card stock. I stamped the flower image randomly in Pink Pirouette ink and sponged the edges also. Then I cut a piece of Very Vanilla card stock. I stamped the edges with a flower in Wild Wasbi ink. Then went back and stamped little flowers in Pink Pirouette and Crumb Cake. I took the Sanded Background stamp inked it in Crumb Cake ink and stamped over all of it. I sponged the edges in Crumb Cake ink. I stamped the flowers in Pink Pirouette, Bravo Burgundy, and Crumb Cake on Very Vanilla card stock. I then cut them out popped the up on Stampin' Dimensionals. On the bottom I took some 1/8 Very Vanilla Taffeta ribbon and wrapped around the bottom and added a bow. Finishing it off with a flower I cut out. I then took the saying from Teeny Tiny Wishes, inked it in Marina Mist stamped on Very Vanilla card stock and punched it out with the Curly Label Punch. I sponged Crumb Cake around the edges.

Supplies Used~
Stamp Set~ Eastern Blooms, Teeny Tiny Wishes, Sanded Background.
Ink~Wild Wasbi, Marina Mist, Pink Pirouette, Bravo Burgundy, Crumb Cake
Paper~Very Vanilla, Wild Wasbi, Marnia Mist, Pink Pirouette, Bravo Burgundy Crumb Cake
Acc.~ Big Shot, Texture Plate Perfect Details, Crimper, Curly Label Punch, Scallop Edge Punch, Linen Thread, 1/8 Very Vanilla Taffeta Ribbon, Whisper White Taffeta Ribbon, Vintage Brads, 5/16 Neutral Brads

Thanks for stopping by have a great Monday!

Holly

Monday's 3D Challenge~Coaster Birthday Date Book using Friends 24-7

Morning everyone!

I know where have I been right? Ever have a day that doesn't go as planned well that was my hole week! lol My washer and dryer were not working well so we ended up getting new ones amazing how that can tie up two days. Then we had some sever weather. We had 39 confirmed tornadoes go through our state and for sure 5 of them were around our surrounding area. We had no damage but I had lots of branches and trees go down. So last week there wasn't any time to stamp! Hopefully this week there is :)

Today's share is a 3D Challenge I posted over on Stampin' Addicts website! If you never been check it out, it is geared towards Stampin' Up! if your a demo be sure to sign up for the demo forums and then give a shout out to me catrules! Today's challenge is to make a Birthday Date Book from 4x4 Coasters! I used the following to create this, some of the items are not available to order yet so a little sneak peak for you!

Friends 24-7 item #113218
En Francais item #109521
Bella Toile item #111598
Big Shot item #113439
Finial Press Embossing Folder item #115963
Scallop Trim Border Punch item #115963
Round Tab Extra Large Punch item #119864
3/16 Corner Small Punch item #119871
Cutter Kit item #106958
Vintage Brads item #109109
1/8 Very Vanilla Taffeta Ribbon item #119960
Early Espresso Marker item #119680
Sponge Daubers item #102892

If you would like to purchase the supplies I used to make this project or place an order HERE, email or call me too!! Just click on the Shop Now button when on my Stampin' Up! Website

Directions~

1. Cut 4 pieces of Early Espresso card stock 4" x 4". Round all 4 corners using the 3/16 Corner Punch. Using the Big Shot and Embossing Folder Finial Press I ran 2 of the pieces through. I then took the Very Vanilla Craft Pad and ran it over the embossed images. Then snail down the embossed pieces each to one coaster. The other two pieces are for the inside of the coasters.

2. Cut 1 piece of Riding Hood Red card stock 3 3/4" x 3 3/4". I then took the Bella Toile stamp inked it in Riding Hood Red and stamped onto the card stock, using the Cutter Kit I roughed up the edges.

3. Cut 1 piece of Very Vanilla card stock 2" x 3 1/2". I took the En Francais Stamp inked it in Very Vanilla Craft ink and stamped onto the card stock. Now crumble it up good, then using Sponge Daubers I ran sponged Riding Hood Red and Early Espresso ink on the creases. I then ran this through the Big Shot along with the Embossing Folder Finial Press. I took the Scallop Trim Border Punch and punched on edge. I then sponged Early Espresso ink around the edges.

4. Cut 1 piece of Early Espresso card stock 2 1/2" x 2 3/4". I used the Cutter Kit and roughed up the edges.

5. Cut 1 piece of Very Vanilla card stock 2 1/4" x 2 1/2". I stamped the bird from Friends 24-7 in Riding Hood Red and rolled it in Early Espresso ink. I then masked it and stamped the En Francais Stamp over it using Early Espresso ink. I sponged the edges with Early Espresso ink. I snailed it to the Early Espresso card stock and placed Stampin' Dimensionals on the back. I then added Vintages Brads to the right of it.

6. For the inside inserts I cut 10 out of Very Vanilla card stock 3 3/4" x 3 3/4". I then used the Crop a dile and punched 3 holes through all the layers and tied 1/8 Very Vanilla Taffeta Ribbon through. I cut the edges and frayed the ribbon.

7. Punch out 3 tabs in Riding Hood Red using the Round Tab Punch. Using the Espresso Marker I wrote Family, Friends and Misc. on the tabs.

Outside view~

Inside view~

Tutorial Video

Supplies Used~
Stamp Sets~Friends 24-7, En Francais, Bella Toile
Ink~Riding Hood Red, Early Espresso, Very Vanilla Craft
Paper~Riding Hood Red, Early Espresso, Very Vanilla
Acc.~Big Shot, Embossing Folder Finial Press, Scallop Trim Border Punch, Round Tab Extra Large Punch, 3/16 Corner Punch, Crop-a-dile, Cutter Kit, Vintage Brads, 1/8 Very Vanilla Taffeta Ribbon, Early Espresso Marker, Sponge Daubers, Stampin' Dimensionals, 4x4 Coasters.

Thanks for stopping in! Have a great day!

Holly

Monday's 3D Challenge Memorial Day Box using Courage

Morning everyone!!

I am sure your all waiting to hear who won the blog candy!! The winner is Melissa Mulder!! Congrats!!! Thank you again to everyone who left a comment I appreciate all of your comments!!

Today's share is a 3D Challenge I posted over on Stampin' Addicts website! If you never been check it out, it is geared towards Stampin' Up! if your a demo be sure to sign up for the demo forums and then give a shout out to me catrules!! This was posted the week of 5/31/2010. The challenge was to make a gift box I did mine for Memorial Day but this would work for 4th of July, welcoming the troops home, or change it out for another occasion, and etc. I used the following to create this~

Courage Stamp Set item #115330
Cutter Kit item #106958
Curly Label Punch item #112208
Kraft Corduroy Buttons item #114340
Vintage Brads item #109109
5/8 Brocade Blue Grosgrain Ribbon item #109057
1/4 Real Red Grosgrain Ribbon item  #109034
Hemp Twine Natural item #100982
Sponge Daubers item #102892
Night of Navy Marker item #100069
Watercolor Wonder Crayons Bold Brights item #106695
Watercolor Wonder Crayons Rich Regals item #106698
Watercolor Wonder Crayons Neutrals item #106746
Blender Pen item #102845

If you would like to purchase the supplies I used to make this project or place an order HERE, email or call me too!! Just click on the Shop Now button when on my Stampin' Up! Website

Directions~

1. Cut 1 piece of card stock 6 3/4" x 12". Hold horizontal and score at 5" and 7". Turn Vertical and score 1 1/4" in on both sides. Then cut tabs and apply sticky strip. Take the Cutter Kit and rough up the top. Mine was cut out of Sahara Sand card stock.

2. Cut 1 piece of card stock 4" x 4 3/4". Mine was Real Red card stock.

3. Cut 1 piece of card stock 3 3/4" x 4 1/2". Mine was out of Sahara Sand card stock I then took the saying from the Courage stamp set, inked in Sahara Sand ink and stamped randomly around the edges. I sponged the edges with Sahara Sand ink. I wrapped some 5/8 Brocade Blue grosgrain ribbon around the bottom and 1/4 Real Red grosgrain ribbon on top of that. I took the Night of Navy Marker and colored the word Courage on the saying then stamped it on Whisper White card stock and punched it out with the Curly Label Punch. I sponged Brocade Blue ink around the edges.

4. Cut 1 piece of card stock 3 1/2" x 3 3/4". Mine was Night of Navy card stock.

5. Cut 1 piece of card stock 3 1/4" x 3 1/2". Mine was Whisper White card stock. I stamped my image in Black Stazon and then colored it in using the Watercolor Wonder Crayons and the Blender Pen. Using the Cutter Kit I roughed up the edges and then sponged Sahara Sand ink around. I placed to Vintage Brads on the left. Snailed it to the Night of Navy and then placed Stampin' Dimensionals behind it. To finish it off I added the Kraft Corduroy button with the Hemp Twin Natural tied through it.

Here is the Tutorial Video

Supplies Used~
Stamp Set~Courage
Ink~Black Stazon, Sahara Sand, Brocade Blue
Paper~Whisper White, Sahara Sand, Real Red, Night of Navy
Acc.~Watercolor Wonder Crayons Bold Brights, Rich Regals and Neutrals, Blender Pen, Curly Label Punch, Mat Pack, Paper Piercing-Tool, Cutter Kit, Vintage Brads, 5/8 Brocade Blue grosgrain ribbon, 1/4 Real Red grosgrain ribbon, Kraft Corduroy Buttons, Hemp Twine Natural, Night of Navy Marker, Sponge Daubers, Stampin' Dimensionals, Glue dots

Thanks for stopping by! Have a great day!

Holly

Monday's 3D Challenge Card Folder using Eastern Blooms

Afternoon everyone! I am posting a little late today. I was waiting for the video to be live before posting I didn't realize how long it was gonna take! lol

Thank you to everyone who left comments on my blog for the Blog Hop! I hope you all enjoyed the tour! I had a lot of fun with that set! There is only a few day's left to order those retiring stamps so you'll want to hurry and get them before it's too late! Be sure to check back tomorrow and see who the blog candy winner was!

This is the 3D Challenge I posted over on Stampin' Addicts website! If you never been check it out, it is geared towards Stampin' Up! if your a demo be sure to sign up for the demo forums and then give a shout out to me catrules!!

Today's challenge is to make this Card Folder! Later this week I will be sharing the cards that go inside this so be sure to check back! Also I am giving a sneak peek to some of our upcoming awesome new colors and a new ribbon! I used the following supplies to create this~

Eastern Blooms Stamp Set item #111626
Sanded Background Stamp Set item #109294
Teeny Tiny Wishes Stamp Set item #115370
Big Shot item #113439
Texture Plate SU Perfect Details item #115962
Crimper item #101618
Curly Label Punch item #112208
Scallop Edge Punch item #112091
Linen Thread item #104199
1/8 Very Vanilla Taffeta Ribbon item #119960
Vintage Brads item #109109
5/16 Neutral Brads item #112533
Whisper White Taffeta Ribbon item #109070

If you would like to purchase the supplies I used to make this project or place an order HERE, email or call me too!! Just click on the Shop Now button when on my Stampin' Up! Website

Directions~

1. Cut 1 piece of card stock 9 1/4" x 12". Turn so it's horizontal and score at 5 1/2" and 6 1/2" then turn so it is vertical and score 1 1/4" on both sides. Then fold bottom up and fold on scored lines. Mine is cut from Crumb Cake card stock, I then used the stamp from Eastern Blooms and stamped with Crumb Cake ink randomly. Using the Paper-Piercing Tool I punched a hole through all layers and then ran some 1/8 Very Vanilla Taffeta Ribbon through to tie the Card Folder closed.

2. Cut 1 piece of card stock 5" x 6". Mine was Wild Wasbi and I ran the card stock through my big shot along with the Texture Plate Perfect Details then sponged the edges with Wild Wasbi ink. I put Stampin' Dimensionals on the back.

3. Cut 1 piece of card stock 5" x 3 1/4". Mine was from Marina Mist, I used the Scallop Edge Punch on the bottom, then stamped the flower randomly all over using the Marina Mist ink. I then sponged the edges with Marina Mist ink. Using the Paper-Piercing Tool I punched holes in each scallop.

4. Cut 1 piece of card stock 1" x 7". Mine was from Bravo Burgundy card stock, I then ran it through the Crimper and trimmed off the excess.

5. Cut 1 piece of card stock 4 1/4" x 4 1/2". Mine was from Pink Pirouette card stock. I stamped the flower image randomly in Pink Pirouette ink and sponged the edges also.

6. Cut 1 piece of card stock 4" x 4 1/4". Mine was Very Vanilla card stock. I stamped the edges with a flower in Wild Wasbi ink. Then went back and stamped little flowers in Pink Pirouette and Crumb Cake. I then took the Sanded Background stamp inked it in Crumb Cake ink and stamped over all of it. I sponged the edges in Crumb Cake ink. I stamped the flowers in Pink Pirouette, Bravo Burgundy, and Marina on Very Vanilla card stock. I then cut them out popped the up on Stampin' Dimensionals. I added two Vintage Brads to the side. To finish it off I colored some Whisper White Taffeta ribbon with Marina Mist ink, I ran some Linen Thread over the top of it and then added a 1/8 Very Vanilla Taffeta bow to it. Finishing it off with a flower I cut out. I then took the saying from Teeny Tiny Wishes, inked it in Bravo Burgundy stamped on Very Vanilla card stock and punched it out with the Curly Label Punch. I sponged Crumb Cake around the edges.

Here is the Tutorial Video

Supplies Used~
Stamp Set~ Eastern Blooms, Teeny Tiny Wishes, Sanded Background.
Ink~Wild Wasbi, Marina Mist, Pink Pirouette, Bravo Burgundy, Crumb Cake
Paper~Very Vanilla, Wild Wasbi, Marnia Mist, Pink Pirouette, Bravo Burgundy Crumb Cake
Acc.~ Big Shot, Texture Plate Perfect Details, Crimper, Curly Label Punch, Scallop Edge Punch, Linen Thread, 1/8 Very Vanilla Taffeta Ribbon, Whisper White Taffeta Ribbon, Vintage Brads, 5/16 Neutral Brads

Thanks for stopping by have a great Monday!

Holly

Stampin' Addicts Last Chance Blog Hop!!

Welcome to Stampin' Addicts Last Chance Blog Hop!!! Each Blog will be featuring one of the retiring stamp sets, that will soon be retired. There are 27 amazing stops on this tour! The Blog tour starts at noon EST today and goes through Sunday June 13th!

If you have been following the tour in order you just came from Heather's Blog Candle With Two Ends were she featured Enjoy Every Moment didn't she do an awesome job! If your just starting here at my blog just follow around from here. I am stop #10 on the tour. The set I am featuring is Hoppy For You!! This set is adorable and is a must have!

1st project is a Card~

My base is Chocolate Chip card stock. Next is a piece of Garden Green card stock. Using the Big Shot and the Texture Plates Kit #4 I used the plate that looks like tree bark and ran the Garden Green card stock through. I then sponged the edges with Garden Green ink. I cut a piece of Brilliant Blue card stock, stamped the little fly randomly all over in Brilliant Blue ink. Then using the White Gel Pen I made little dashes all around. I cut a strip of Chocolate Chip card stock and on top I placed a piece of Old Olive Patterns DSP, which I used the Scallop Edge Punch on the bottom off. I took some 5/8 Chocolate Chip Grosgrain Ribbon and wrapped around in the center. I added some Natural Hemp Twine on top of that.

I cut a piece of Whisper White card stock, stamped my images in Black Stazon ink and Old Olive ink. I colored the lily pad in with Earth Element Watercolor Wonder Crayons using a Blender Pen. Using the Color Spritzer Tool and Brilliant Blue Marker I spritzed the blue all over the Whisper White card stock. I sponged the edges with Chocolate Chip ink. I then placed a piece of Garden Green card stock behind it and popped it up with Stampin' Dimensionals. At the top I stamped the saying in Brilliant Blue on Whisper White card stock and punched it out with the Small Oval Punch. I sponged the edges with Old Olive ink and placed a Stampin' Dimensional behind it. On the bottom right hand corner I added a bow made out of 1/4 Old Olive Grosgrain Ribbon and Natural Hemp Twine. To finish it off I placed a 5/8 Neutral Jumbo Brad to the right at the top.

Supplies Used~
Stamp Set~ Hoppy For You
Ink~Brilliant Blue, Old Olive, Garden Green, Chocolate Chip, Black Stazon
Paper~Chocolate Chip, Garden Green, Brilliant Blue, Whisper White, Old Olive Patterns DSP
Acc.~Big Shot, Texture Plate Kit #4, Watercolor Wonder Crayons Earth Elements, Blender Pen, Scallop Edge Punch, Small Oval Punch, 5/8 Chocolate Chip Grosgrain Ribbon, 1/4 Old Olive Grosgrain Ribbon, Natural Hemp Twine, 5/8 Neutral Jumbo Brad, White Gel Pen, Brilliant Blue Marker, Color Spritzer Tool, Stampin' Dimensionals, Glue Dots


2nd project is a 12 x 12 Scrapbook Page~

This is my little cousin Hayden. He is such a goof and silly all the time. He loves showing off his sunglasses to me. He thinks he is the coolest kid in the world. Of course I think so too :)

My base is Chocolate Chip card stock, then a piece of Brilliant Blue card stock. I stamped the little flies in Brilliant Blue ink randomly all over. I then took the Color Spritzer Tool and Brilliant Blue marker and spritzed all over the card stock. Using the Big Shot and Go Go Boots Sizzlits Alpha I die cut my page title out in Garden Green card stock. I then cut out a piece of Old Olive card stock with the Scallop Circle #2 die, I ran that through the Big Shot along with the Texture Plates Kit #4. I sponged the edges with Old Olive ink. I then added the rest of my title to it, stamped some frogs in Garden Green ink cut them out and popped them up with Stampin Dimensionals. I added the Chocolate Chip log under the frog.

In the center of the page I added a strip of Chocolate Chip card stock, then a piece of the Old Olive Patterns DSP. On the bottom the DSP I punched it out with the Scallop Edge Punch. I added a strip of Brilliant Blue card stock then the 5/8 Chocolate Chip grosgrain ribbon. On top of that I ran some Natural Hemp Twine. I then placed my pictures over the strip, which our mounted on Garden Green card stock. To finish it off I added little dashes at the top with the White Gel Pen and then 3 frogs stamped in Garden Green ink that I cut out and added Stampin' Dimensionals to the back. On the right and left I add 5/8 Neutral Jumbo Brads. On the bottom left hand corner I stamped the lily pad in Black Stazon ink on Whisper White card stock, I colored it in with the Earth Elements Watercolor Wonder Crayons and then cut it out. Placed a Stampin' Dimensional behind that and added in my journaling.

Supplies Used~
Stamp Set~ Hoppy for You
Ink~Black Stazon, Brilliant Blue, Old Olive, Garden Green, Chocolate Chip
Paper~ Chocolate Chip, Old Olive, Garden Green, Brilliant Blue, Whisper White, Old Olive Patterns DSP
Acc.~Big Shot, Go Go Boots Sizzlets, Scallop Circle Die 2, Texture Plates Kit #4, Watercolor Wonder Crayons, Scallop Edge Punch, White Gel Pen, Brilliant Blue and Chocolate Chip Marker, Color Spritzer Tool, Blender Pen, 5/8 Neutral Brads, 5/8 Chocolate Chip grosgrain ribbon, Natural hemp twine

3rd project is a Center Piece~

This little project I created can be used for any event, some examples are for a wedding, bridal shower, baby shower, kid's birthday party, retirement party, summer party and etc. I geared mine more towards a wedding.

Using the Big Shot and the Scallop Circle #2 die I cut out a piece in Garden Green card stock. I then ran it through the Big Shot again only this time using the Texture Plates Kit #4, again picking the one that looks like bark. I sponged the edges with Garden Green ink. I then used the Big Shot and Flower, Daisies #2 and cut out flowers in Whisper White card stock. In the center I added a 5/8 Neutral Jumbo Brad. Off to the side I added two little loops of Natural Hemp Twine. I then stamped the log in Chocolate Chip ink onto Whisper White card stock, I stamped two frogs in Old Olive on Whisper White card stock and cut them out. I placed a piece of card stock behind them to stand them up. Last I stamped the say so hoppy for you in Brilliant Blue ink on Whisper White card stock. I then cut it as a banner and sponged the edges with Old Olive ink.

Supplies Used~
Stamp Set~ Hoppy for You
Ink~Chocolate Chip, Garden Green, Old Olive, Brilliant Blue
Paper~Garden Green, Whisper White
Acc.~Big Shot, Scallop Circle #2 Die, Flower Daises #2 Die, 5/8 Neutral Jumbo Eyelet, Natural Hemp Twine, Sponge Daubers, Mini Glue dots

Leave a comment and on Tue. I will be drawing for some blog candy!! It will be an assortment of stuff I used to create these project!!

This completes my tour of Hoppy for You Stamp Set! Hope you have enjoyed my projects, and had as much fun as I did!! Now you'll want to hop on over to Debra's Blog Heartfelt Inkspiration were she will be showing some wonderful projects featuring Nursery Necessities. Have fun hopping!

Thanks for stopping by! Have a great weekend!

Holly

Monday's 3D Challenge Nail File Holder using Bella Toile

Morning everyone!

I haven't been posting lately sorry I haven't had much time to stamp. It's that time of the year when it's really busy for me. Lots of farm work, yard work and cleaning jobs. I am sure you all have heard about the color renovation with Stampin' Up! I had to redo my entire craft room over and that took me a week! I felt like I was moving. lol

Anyhow here is the 3D challenge I posted over on Stampin' Addicts website! If you never been check it out, it is geared towards Stampin' Up! if your a demo be sure to sign up for the demo forums and then give a shout out to me catrules!!

Today's challenge is to make this Nail File Holder. I've been wanting to make these for over 2 years now! lol I got one at convention and never got around to making my own! Below is the list that I used to create this now there are some item's that our a sneak peek from the upcoming catalog so they are not available to order yet~

Bella Toile Stamp Set item #111598
1/2 Circle Punch item #104390
Vintage Brads item #109109
Hemp Twine Natural item #100982
Designer Buttons Latte item #114333
Cutter Kit item #106958
1/8 Taffeta Ribbon Very Vanilla
DSP Newsprint

If you would like to purchase the supplies I used to make this project or place an order HERE, email or call me too!! Just click on the Shop Now button when on my Stampin' Up! Website

Directions~

1. Cut one piece of DSP 3" x 5". Then score 1" in on 3" length on both sides. On the 5" length score a 1/4" in. This will be your bottom. Fold on all scored lines and snail together. Mine was made out of the upcoming new DSP Newsprint. I took the Bella Toile stamp inked in Crumb Cake ink and stamped directly onto the DSP. I then applied ink around the edges it give it a more vintage feel.

2. The end that is open which is your top, slide the 1/2 Circle punch half ways in and punch out a piece.

3. Cut a piece of card stock 1" x 3". Mine is Crumb Cake card stock. I took the Bella Toile stamp inked in Crumb Cake and stamped onto the card stock. Using the Cutter Kit I roughed up the edges and then applied ink onto the card stock edges. Then I wrapped it around in the center and snailed it together. I took some Natural Hemp Twine wrapped that around twice and tied a bow. In the center I added a Designer Button Latte with a piece of 1/8 Very Vanilla Taffeta ribbon tied through it. To finish it off at the bottom I placed two vintage brads.

  

Here is the Tutorial Video

Supplies Used~
Stamp Set~ Bella Toile
Ink~Crumb Cake
Paper~Crumb Cake, DSP Newsprint
Acc.~ Cutter Kit, 1/2 Circle Punch, Vintage Brads, Designer Buttons Latte, Natural Hemp Twine, 1/8 Taffeta Ribbon Very Vanilla

Thanks for stopping in! Have a great day!

Holly