« September 2009 | Main | November 2009 »

13 posts from October 2009

10/13/2009

Falling Leaves Sample

Morning! Welcome to my blog :)
 
Last night was my Halloween Mystery Hostess Party! We had a lot of fun!! Thanks to everyone who came!! This was one of the cards we made last night! I didn't like and finally gave up and thought well every now and then you have to have a dud right. lol I got a few comments the gals loved it! lol Just goes to show what you might not like someone else will :)

I used the Falling Leaves stamp set item #115368 and the Bright Blessings Jumbo wheel item #115626. The base is Dusty Durango, the next layer is Rich Razzleberry. I ran it through the big shot with the Texture plates Kit #4. I took the bone folder and roughed up the edges to make them fold a little. On the bottom I took the tearing edge and ripped the edge. I cut a piece of More Mustard and used the Bright Blessings jumbo wheel, and wheeled it in More Mustard. I also took the bone folder to that too and roughed up the edges. I took some 1/2" polka-dot dusty durgango grosgrain ribbon and wrapped it around. I stamped one leaf in dusty durango on whisper white and punched it out with the 1 1/4" circle punch, then took the 1 3/8" circle punch and punched out the Rich Razzleberry. I layered the two pieces and placed a dimensional on the back. I stamped grateful in Rich Razzleberry ink on whisper white card stock and punched it out using the modern label punch, then ran a piece of dusty durango through the big shot, with the matching Magnetic movers and shapers. Layered them and placed to gold eyelets at each end. I took some of our Champagne Mist shimmer paint and applied to the card with a sponge dauber to give it a shimmer.

If you would like to purchase the supplies I used to make this project or place an order you can place an order
HERE, email or call me to!!

 

Supplies Used~
Stamp Set~ Falling Leaves
Ink~More Mustard, Dusty Durango, Rich Razzleberry
Paper~More Mustard, Dusty Durango, Rich Razzleberry, Whisper White
Acc.~ Big Shot, Texture plate #4, Magnetic Mover and shapers dies, Modern Label Punch, Crop a dile, Metallic eyelets, 1 1/4 ", 1 3/8" circle punches, 1/2" polka-dot Dusty Durango grosgrain ribbon, Tearing Tool, bone folder, Champagne Mist Shimmer paint, sponge daubers

Thanks for stopping in and have a great day!
Holly

10/12/2009

Monday's 3D Challenge using From The Crypt

Morning and welcome to my blog! Sorry I haven't been posting last week was a little crazy! I am still trying to bounce back from being so sick. My brother had surgery on his hand to remove a tumor and have a cement like material put in its place, and he had so much pain after the surgery they gave him morphine and he had a reaction to it. So I ended up staying longer than planned with him. Hes doing a lot better!
 
Today's share is the 3-D challenge I posted over on the Stampin' Addicts site! Click on the link if you would like to visit this awesome site!
http://www.stampinaddicts.com/Head on over there is a lot of different challenges posted each week!!! If your a demo be sure to sign up for the demo forums too! The challenge was to make this little Halloween Treat Bag!
 
I used 3 stamp sets for this project. I used From The Crypt item #115460, Sanded Background item#109294 and Grateful Greetings item #116511

Directions~
1. Cut lunch bag to 5 3/4" long 
2. Cut a piece of card stock 4 3/4" x 5 1/2" this is for the front of the bag (mine was basic black)
3. Cut a piece of card stock 4 1/4" x 5", I used the ticket punch on all four corners and sponged with perfect plum. I stamped Goblin Greetings in Old Olive and stamped the bats in Pumpkin Pie.
4. Cut a piece of card stock 4 1/2" x 8 1/2", then score at 5 3/4". The fold will go over the top of your lunch bag, I took the scallop edge punch to the bottom. Then took the 1/16th hand punch and punched little holes in the scallops. At the top I added the Perfect plum piece that I punched out with the Word window punch and they set 2 black vintage brads.

To decorate like mine~

Cut 1 piece of card stock 3 1/4" x 3" (mine was whisper white) stamp your image on this piece. I sponged pumpkin pie around the edges.

Cut 1 piece of card stock 3 1/2" x 3 1/4" (mine was basic black)

Cut 1 piece of card stock 4 1/2" x 2 1/2" (mine was old olive) I stamped the spiders in Old Olive ink on the Old Olive card stock. I used the cutter kit to rough up the edges.

Cut 2 pieces of Designer Paper 4 1/2" x 1" I used the cutter kit to rough up the edges.

Cut 1 piece of Card stock 2 1/2" x 1" (mine was whisper white) stamp your saying on this piece and round the corners. I sponged the edges in Old Olive.

If you would like to purchase the supplies I used to make this project or place an order you can place an order
HERE, email or call me to!!

 Front view
 


Side view

 


Inside view
 

 
Supplies Used~
Stamps: From The Crypt, Sanded, Grateful Greetings
Inks: Pumpkin Pie, Old Olive, Basic Black
Papers: Pumpkin Pie, Old Olive, Basic Black, Whisper White, DSP Cast-a-Spell
Accessories: Vintage Brads, Scallop Edge Punch, Word Window Punch, 1 /16th hand punch, Cutter Kit, Mat Pack, paper piercer, 1 1/4 stripped Basic Black gros. ribbon, 3 /16 corner rounder, ticket punch, sponge daubers, dimensionals
Thanks for stopping by! Have a great day!

10/05/2009

Monday's 3D Challenge using Cheep Talk

Morning and welcome to my blog! I haven't been posting this week I have been pretty sick. I got dh's cold only it turned into a sinus infection and the beginning of pneumonia so I haven't felt up to doing too much. lol I am feeling a little better this morning finally so maybe the drugs are starting to kick it to the curb!
 
Today's share is the 3-D challenge I posted over on the Stampin' Addicts site! Click on the link if you would like to visit this awesome site!
http://www.stampinaddicts.com/Head on over there is a lot of different challenges posted each week!!! If your a demo be sure to sign up for the demo forums too!

The challenge was to make a Junior Legal Pad Cover! I thought it turned out cute and the colors are so bright. Its been very rainy and cloudy here for over a week now. The stamp set I used was Cheep Talk item #113204.
 
The base is Tempting Turquoise card stock. You'll want to cut a piece of card stock 5 1/2" x 9 1/2". Then score it at 8 1/4" and 8 1/2". This will create the little flap for the top of the Junior Legal Pad. I cut a piece of DSP Pattern Prints in Pumpkin Pie at 5 1/2" x 1". I also cut a little strip of Tempting Turquoise and punched it with the Scallop Edge Punch, I attached this under the DSP. I ran some 5/8" Old Olive Grosgrain Ribbon around it. I took the Cheep Talk stamp set, colored the limb with Chocolate Chip Marker, added some leaves to the steam and cut it out. I stamped the flowers in Pink Passion and set 2 Fire Circle Rhinestone brads in the center of 2 of the flowers. The other flower I took a Tempting Turquoise button from the Designer Button set called Playground and set it in the center with a glue dot. I stamped the bird in Tempting Turquoise and cut it out. Then put dimensionals on the back of all the pieces. At the bottom I stamped the flowers in Pumpkin Pie, Pink Passion and the leaves in Old Olive. I thought it turned out pretty cute!

If you would like to purchase the supplies I used to make this project or place an order you can place an order
HERE, email or call me to!!

 
 

Here is the Tutorial Video!


Supplies Used~
Stamps: Cheep Talk
Inks: Tempting Turquoise, Old Olive, Pumpkin Pie
Papers: Tempting Turquoise, Whisper White, DSP Print Patterns
Accessories: Designer Buttons Playground, Rhinestone brads Fire Circle, Scallop Edge Punch, 1/16 hand punch,5/8 Old Olive grosgrain ribbon, dimensionals, glue dots

Thanks for stopping by and have a great day!
Order Online

Holly's Clubs

Hostess Clubs


Rubber Redneck
Paper Pumpkin Club


Catalogs Specials
Etsy Store
Projects

web page visitor statistics

Site by: Pravus Media