« August 2009 | Main | October 2009 »

18 posts from September 2009

09/30/2009

Friends 24-7 card

Morning stampers! Welcome to my blog! I wanted to share this card for a very long time with you all, and my exciting news!!! Only I missed placed it and finally found it! Stampin' Up! has a gallery just for there demos to send cards into and then if your card is picked they showcase it on there gallery!!! My card got picked!!!! Wooo Hooooo
 
I used two stamp sets for my card I used Friends 24-7 item #113218 and Baroque Background Stamp (this is retired) My base is Mellow Moss card stock, I stamped the Baroque Background with Mellow Moss ink and stamped it onto the card stock. I took the scroll from Friends 24-7 and stamped that in Chocolate Chip ink. I cut a strip of Chocolate Chip card stock and used the Eyelet Border punch on one side of it. Then I took some Mellow Moss Taffeta ribbon and ran that over the top of it and placed it off to the left side of the card.

Next I cut a strip of Natural Ivory card stock and used the eyelet border punch on one side. I took the Friends saying from Friends 24-7 stamp set and stamped that in Sahara Sand randomly all over, then took the scroll from the same set inked it up in Mellow Moss and stamped that randomly. I took a sponge dauber and sponged the edges with Chocolate chip ink. I stamped the bird from Friends 24-7 in Chocolate Chip ink on Naturally Ivory paper and then sponged the edges with Chocolate chip ink. I layered it on Mellow Moss then Chocolate chip and taped it to the Natural Ivory piece.
 
I stamped 24-7 in Chocolate Chip ink on Natural Ivory card stock and punched it out with the small oval punch, then sponged the edge with Chocolate Chip ink. I punched out a piece of Mellow Moss with the Large Oval Punch, and then a piece of Chocolate Chip with the Scallop Oval Punch. I placed it on a dimensional on the card. I love how this card turned out! This stamp set is one of my favorite sets!!!
 
If you would like to purchase the supplies I used to make this project or place an order you can place an order
HERE, email or call me to!!

 

Supplies Used~

Stamp Set~ Friends 24-7, Baroque Background
Ink~Sahara Sand, Mellow Moss, Chocolate Chip
Paper~ Mellow Moss, Chocolate Chip, Natural Ivory
Acc.~ Eyelet Border Punch, Scallop Oval Punch, Large Oval Punch, Small Oval Punch, Mellow Moss Taffeta ribbon, Sponge Dauber, dimensionals.
Thanks for stopping in and have a great day!
Holly

09/29/2009

Video Tutorial for Lunch Bag

Hello and welcome to my blog! Today I am posting the Tutorial video for the Lunch Bag I designed last Monday for my 3D challenge.

Decorating a basic Lunch Bag is supper easy to do! You take an ordinary lunch bag and make into a cut little gift bag for any occasion! Click
HERE, for directions.

 If you would like to purchase the supplies I used to make this project or place an order you can place an order
HERE, email or call me to!!
 
Have a great day!
Holly

09/28/2009

Monday's 3D Challenge usinging From The Crypt

Morning and welcome to my blog! I know, I know I have been missing in action. Our house got hit with some nasty germs. Dh and I both have been pretty sick this last week, and I sure didn't have an mojo at all to do anything, but run the remote :)
 
Today's share is the 3-D challenge I posted over on the Stampin' Addicts site! Click on the link if you would like to visit this awesome site!
http://www.stampinaddicts.com/Head on over there is a lot of different challenges posted each week!!! If your a demo be sure to sign up for the demo forums too! The challenge was to make a bag from an Envelope!! I love how this one turned out! I received one last year from one of my adopted down line Amy and just loved it! It was a lot of fun to make!! These are great for anytime of the year, Halloween, Christmas, Valentines, B-days well you get the point :)
 
I used 2 stamp sets for this project. I used From The Crypt item #115460 and Teeny Tiny Wishes item # 115370. I took an envelope that measured 4 1/2" x 5 3/4", I taped down the flap then scored 1/2" in on each long side. Then I scored 1/2" on one of the short sides. The other short end I cut 1/4" off. Then folded the envelope into a bag. I cut a piece of Basic Black card stock to fit the envelope and a piece of our DSP Cast-a-Spell, I sponged the edges with Old Olive classic ink. On the bottom I ran a piece of 1/4 pumpkin pie grosgrain ribbon. I stamped Happy Halloween from the Teeny Tiny Wishes Set in Basic Black ink on Whisper White card stock and then punched it out with the modern label punch. I took the spider out of the From the Crypt stamp set and stamped the legs in Basic Black around the edges. Then sponged the edges with Old Olive ink. I placed dimensionals on the back and popped it up.
 
I stamped the Skull out of the From the Crypt Stamp Set in Versa Mark Ink and poured Black embossing powder over it. Then heat set it. I sponged the edge with Old Olive ink. I layered it on Basic Black then Pumpkin Pie card stock. I placed dimensionals on the back and put it on the front of my bag. At the top I took the double rectangle punch and punched through the layers. Then I thread the 1/4 eggplant grosgrain ribbon through. In the center I placed a build-a-brad. (more details on that below) And bam! I created a cute little bag for Halloween! You can too! I have also added a tutorial video below for you too! Easy to make!

If you would like to purchase the supplies I used to make this project or place an order you can place an order
HERE, email or call me to!!

 


I took the Skull image in Basic Black ink and stamped it on Whisper White card stock. Then where the bats our at on the left hand side I punched them out with the 1/2 circle punch. I sponged the edges with Old Olive and then used a glue dot and placed it on the build-a-brad. I didn't add the clear cover over it I liked how it looked!

 


Here is the tutorial video


Supplies Used~
Stamps: From the Crypt, Teeny Tiny Wishes
Inks: Basic Black, Old Olive, Versamark
Papers: Basic Black, Pumpkin Pie, Whisper White, DSP Cast A Spell
Accessories: Black embossing powder, heat gun, powder pals, embossing buddy, sponge, modern label punch, 1/4 pumpkin pie and elegant eggplant grosgrain ribbon, build-a-brad pewter, double rectangle punch, 1/2 circle punch, 1/16 hand punch, dimensionals
Thanks for stopping in and have a great Monday!
Holly

09/22/2009

Christmas Share using Snow Swirled

Hello stampers! Welcome to my blog! I didn't get the video done for yesterday's tutorial it is raining here. Its very dark and I know some people complained last time that the video was too dark the last time it rained so I am waiting until the cloudiness goes away but we really needed the rain bad.
 
The card I am sharing with you all today is a card I did for another swap that I was in. I used two stamp sets for this creation. I used Snow Swirled item #111690 and Teeny Tiny Wishes item #115370. The base of my card is Dusty Durango, then Chocolate Chip. I cut a piece of Bashful Blue card stock and took the snowflake from the Snow Swirled stamp set and inked it up in Bashful Blue ink, and stamped randomly all over. I sponged the edges with Bashful Blue ink. I took a piece of Dusty Durango Print Patterns Designer Paper cut it to fit the Bashful Blue card stock then took the Eyelet Border Punch to it. I then took a piece of 1/2 polka-dot Dusty Durango grosgrain ribbon and wrapped it around the Bashful Blue card stock about half ways down.
 
Using the Word Window Punch I punched out a piece in Old Olive and folded it in half to go over the Bashful Blue and Chocolate Chip card stock. Then I placed a clear rhinestone brad in the end. I took the Tree from the Snow Swirled set and stamped it in Old Olive ink on the Whisper White Card stock. I sponged the edges with Chocolate Chip ink. I stamped the little snowflakes in Bashful Blue ink on Whisper White card stock and punched them out with the 1/2" circle punch. I add glitter to the center of all the snowflakes. Then the 3 Bashful Blue ones I placed dimensionals on the back and popped them up off the tree. I cut a piece of Old Olive card stock to go behind the Whisper White, I sponged the edges with Old Olive ink. I took the Merry Christmas from the Teeny Tiny Wishes stamp set, stamped it in Chocolate Chip ink on Whisper White card stock punched it out with the Word Window Punch and then sponged the edges with Dusty Durango classic ink. I placed a dimensional behind that to pop it up off the card. I love how it turned out and just love the Snow Swirled stamp set! The colors are not traditional colors but I love how well they go together!

If you would like to purchase the supplies I used to make this project or place an order you can place an order
HERE, email or call me to!!

 
Supplies Used~
Stamp Set~Snow Swirled, Teeny Tiny Wishes
Ink~Dusty Durango, Chocolate Chip, Old Olive, Bashful Blue
Paper~ Dusty Durango, Chocolate Chip, Bashful Blue, Old Olive, Whisper White, DSP Dusty Durango
Acc.~ Eyelet Border Punch, 1/2 circle punch, 1/2 polka-dot grosgrain ribbon, Word Window Punch, Clear Rhinestone Brads, Sponge, dimensionals
Thanks for stopping bye have a great day!
Holly

09/21/2009

Monday's 3-D Challenge using Crazy for Cupcakes

Morning and welcome to my blog :) I am posting late this morning. We got home late last night and I am dragging today. lol We had a lot of fun!!
 
Welcome to my Monday's 3D Challenge! Today's share is the 3-D challenge I posted over on the Stampin' Addicts site! Click on the link if you would like to visit this awesome site!
http://www.stampinaddicts.com/Head on over there is a lot of different challenges posted each week!!! If your a demo be sure to sign up for the demo forums too! The challenge was to make decorate a lunch bag!! I love how this one turned out!
 
I used 2 stamp sets for this bag. I used Crazy for Cupcakes item #111618 and Petal Prints Background item#111008. I took a Lunch Bag that was 5" x 9 3/4" and cut it down to 9". Next I cut 2 pieces of Chocolate Chip card stock and cut them 5" x 9" this is to cover the bag front and back. Then I cut a piece of Melon Mambo card stock 4 1/2" x 8 1/2" I took the Pretty Petal Background stamp and inked it with Melon Mambo ink and stamped on it. I took a sponge and Chocolate Chip ink and sponged around the edges. I cut a piece of our Designer Series Patter Prints Pumpkin Pie paper at 4 1/2" x 4 1/4" then took the Eyelet Border punch to one edges and sponged the edges with Chocolate Chip ink.
 
I stamped the little saying from Crazy For Cupcakes set and then layered it on the Melon Mambo paper. I took a piece of 1" double stitched Chocolate Chip grosgrain ribbon and wrapped it around the top of the DSP. I then stamped the image of the cupcakes from Crazy For Cupcakes Set in Basic Black ink on Whisper White card stock. I colored the cupcake in with the blender pen using the Melon Mambo and Pumpkin Pie ink. I added some dazzling diamonds glitter to the cupcakes to jazz them up a little! Then layered it on Chocolate Chip card stock and Melon Mambo card stock. Then attached to the front of the lunch bag with dimensionals. At the top of the bag I took the Scallop Oval Punch and punched through the layers to make a little handle. I topped it of with a bow I made from 1/4 Pumpkin Pie grosgrain ribbon.
 
If you would like to purchase the supplies I used to make this project or place an order you can place an order
HERE, email or call me to!!

 
 

Supplies Used~
Stamps: Crazy for Cupcakes, Pretty Petals
Inks: Basic Black, Melon Mambo, Pumpkin Pie
Papers: Chocolate Chip, Melon Mambo, Pumpkin Pie, DSP Pumpkin Pie, Whisper White
Accessories: Scallop Border Punch, Eyelet Border Punch, 1/4 Pumpkin Pie grosgrain ribbon, 1" double stitched Choc. Chip ribbon, Dazzling Diamonds Glitter, 2-way glue pen, blender pen, dimensionals
Thanks for stopping in and have a great Monday!
Holly

09/17/2009

Falling Leaves Stamp Set and Bright Blessings Wheel

Good morning and welcome to my blog! It this is your first time visiting hope you enjoy my blog if this is your return trip thanks for stopping back in! The other day I announced the winner to my Blog Candy, the winner was Melody (lacyquilter) please email me so I can send you your goodies! :)

Today's card is a card I did for a swap! I will be honest I really struggled with this card, I don't know why I love the stamps and the wheel I used but it sure didn't want to come together in the beginning! I used Falling Leaves Stamp Set item #115368 along with Bright Blessings Jumbo Wheel item #115626.

My base of the card is Perfect Plum, I stamped at the bottom using one of the leaves from the Falling Leaves Stamp Set. I stamped it in Perfect Plum classic ink for a tone on tone affect. Then I layered Very Vanilla, Soft Suede, and Old Olive. I took the Bright Blessings Jumbo Wheel and inked it in Perfect Plum wheeled it out on a piece of Very Vanilla card stock. I sponged the edges with Soft Suede ink.

I stamped Grateful on a piece of Old Olive card stock with Old Olive ink then punched it out using the Modern Label Punch. I placed two gold brads on each end to hold it in place. To the right I wrapped some twill tape around. I took the little saying from Falling Leaves Stamp set. I stamped first in Soft Suede punched out the center with the 1/2 circle punch, next stamped the same stamp in Old Olive and punched that out with the 1" circle punch. Then I took the 1 1/4" circle punch and stamped out a piece in Perfect Plum. I layered each piece with a dimensional, then sponged the edges with Perfect Plum classic ink.
 
If you would like to purchase the supplies I used to make this project or place an order you can place an order
HERE, email or call me to!!

 

Supplies Used~
Stamp Set~ Falling Leaves, Bright Blessings Jumbo Wheel
Ink~ Perfect Plum, Old Olive, Soft Suede
Paper~ Very Vanilla, Perfect Plum, Old Olive, Soft Suede
Acc.~ Modern Label Punch, 1/2 circle Punch, 1" circle punch, 1 1/4" circle punch, twill tape, gold brads, dimensionals
Thanks for stopping in and have a great day!
Holly

09/16/2009

Card Halloween Frights and Sanded Background Stamps

Morning! Welcome to my blog :) Sorry I didn't post yesterday, I over slept. Of course yesterday was a day that I had a cleaning job so I rushed around the house like a chicken with its head cut off to get to my client's home in time. Up on my arrival my customer greets me at the door and says I am soo glad your here! I want you to clean everything today. So that meant a job that takes a few hours normally took me most of the day. That was more than ok because that meant more money to buy stamps :) Then I rushed home in time to help dh finish up working on a section of our siding and head to town and clean another job. What a day I tell ya! I am so grateful to who ever invented coffee!! I did however manage to make this card last night :)

I used two stamp sets to create this card. I used Halloween Frights item #111766 and Sanded Background item #109294. My base is Basic Black card stock, then Old Olive card stock which I sponged the edges with Old Olive classic ink. Then I cut a piece of Whisper White took the Sanded Background stamp and stamped it in Basic Black. I sponged the edges with Basic Black ink. I placed two vintage brads in the upper right hand corner. I cut a strip of Designer Series Paper called Cast-A-Spell, (this paper is awesome), I roughed up the bottom edge with the cutter kit and then across the top I ran 1/2 Old Olive striped grosgrain ribbon. I cut a piece of Whisper White card stock and stamped the scary cat from Halloween Frights stamp set in Basic Black ink and sponged the edges with Basic Black ink. I then layered it on Old Olive and Basic Black card stock. I placed dimensionals on the back and set it on the card.

For my little greeting I stamped Halloween Frights in Basic Black ink on Whisper White card stock. I punched it out with the Modern Label Punch. I ran the Magnetic Movers and Shapers through my Big Shot and a piece of Old Olive card stock to cut out a bigger Modern Label punch to place behind the white one. Next I took the Wide Oval Punch and punched out a piece of Basic Black card stock. Then layered them all together, placed a dimensional on the back and set it in the lower right hand corner.

If you would like to purchase the supplies I used to make this project or place an order you can place an order
HERE, email or call me to!!

Tip for the day When placing more than one brad use your Mat Pack and Paper Piercer to get them evenly spaced and lined up! It makes it soo much easier!!

 


On the inside I cut a piece of Whisper White card stock and stamped the bats from the Halloween Frights Set in Old Olive classic ink.

 

Supplies Used~
Stamp Set~ Halloween Frights, Sanded Background
Paper~ Old Olive, Whisper White, Basic Black, DSP Cast-A-Spell
Ink~ Basic Black, Old Olive
Acc.~Big Shot, Magnetic Movers and Shapers, Cutter Kit, Large Oval Punch, Modern Label Punch, 1/2 Old Olive striped grosgrain ribbon, vintage brads, Paper Piercer, Mat Pack, Sponge, Dimensionals

Thanks for stopping in and have a great day! Holly

 

09/14/2009

Monday's 3D Challenge~ Scallop Circle Box using From The Crypt

Morning and welcome to my blog! Today is my Monday 3D Challenge but before I get posting on that I need to announce the winner of my blog candy first!!! Drum roll please.................and the winner is Melody (lacyquilter)!!! Whooo Hooo Congrates!! Please email me :)

Ok onto Monday's 3D challenge this week!! Today's share is the 3-D challenge I posted over on the Stampin' Addicts site! Click on the link if you would like to visit this awesome site!
http://www.stampinaddicts.com/Head on over there is a lot of different challenges posted each week!!! If your a demo be sure to sign up for the demo forums too! The challenge was to make this box from our Scallop Circle die!! I love how this one turned out!
 
I used 2 stamp sets to create this project. I used From The Crypt item #115460 and Grateful Greetings item #116511 (this is a set from the Holiday mini). You will need your big shot and the Scallop Circle bigz die to create this project! First cut out 2 pieces of cardboard and run through the big shot with your Scallop Circle die. Then cut out 3 pieces of Basic Black card stock and run through the big shot with your Scallop Circle die. Glue 1 of the Basic Black scallops to your chipboard scallop to create your base. Then glue the 2 remaining ones to the other chip board piece. This will be your lid so cover both sides of the chipboard up. For the rest of the details watch the video below!

If you would like to purchase the supplies I used to make this project or place an order you can place an order
HERE, email or call me to!!
 
Front view

 


Top view I stamped the image from the stamp set called From The Crypt. I stamped it with VersaMark and then embossed it using Black embossing powder. I roughed up the circles with the cutter kit and then sponged Pumpkin Pie classic ink around the edges. Then added 1 1/4 Basic Black stripped grosgrain ribbon to the top.

 

 
Inside view I stamped Goblin Greetings from Grateful Greetings in Basic Black ink on the pumpkin pie card stock. Then I stamped the spider From The Crypt Stamp set in Pumpkin Pie classic ink around the edges. I stamped the skull From The Crypt Stamp set in Basic Black on the Pumpkin Pie card stock.

 


Here is the Tutorial Video on how to make it.
 


Supplies Used~
Stamps: From The Crypt, Grateful Greetings
Inks: Basic Black, Pumpkin Pie, Versa Mark
Papers: DSP Cast-a-Spell, WW, Basic Black, Pumpkin Pie
Accessories: Cutter Kit, Word Window Punch, Big Shot, Circle Scallop bigz die, Embossing Gun, Black embossing powder, powder pals, 1 1/4 Basic Black Stripped Grosgrain ribbon, 5/8 old olive grosgrain, Circle Scissor Plus, Glass Mat

Thanks for stopping by and have a great day! Holly

09/11/2009

A Rose is A Rose

Morning and Happy Friday!!!! Yesterday I saw a sketch challenge posted on Gretchen Barron's Blog so I had to go try it out and this is what I came up with. I changed it just a little because I can never follow exactly :)

I used two stamp sets for this card I used A Rose is A Rose item #111560 and Teeny Tiny Wishes item #115370. My base is Soft Suede, next is a piece of Whisper White card stock. I cut a piece of So Saffron Patterns Designer Series Paper, I sponged the edge with Soft Suede and placed 3 half pearls from the Pretties Kit item #109114 in the bottom right hand corner. I cut a strip of Soft Suede card stock punched the bottom edge with the eyelet border punch. Across the top I took the mat pack and paper piercer and pierced little holes across the top and down the right hand side half ways.
 
I wrapped some white organza ribbon around it. Using the Circle Scissor Plus item #112530 and the Glass Mat item #112531 I cut out a 3 3/4" circle out of Whisper White card stock, I cut part of the edge off and stamped my Rose from A Rose is a Rose Stamp Set in So Saffron. I stamped the leaves in Soft Suede and sponged the edges with Soft Suede. I stamped Happy Birthday from Teeny Tiny Wishes in Soft Suede on Whisper White card stock I punched it out with the Large Oval Punch and sponged the edges with Soft Suede. Then using the Scallop Oval Punch I punched out a piece in the So Saffron Prints Designer Series Paper. I pierced holes in the scallops and then mounted it to the front of the card using dimensionals. I really like how this card turned out, I will admit I had some doubts in the begining. lol

If you would like to purchase the supplies I used to make this project or place an order you can place an order
HERE, email or call me to!!

 

I dressed up the inside too! I just added a strip of So Saffron Prints Designer Series Paper, punched the edge with the Eyelet Border Punch and sponged the edges with Soft Suede. It really dresses up the card on the inside by adding that little extra!

 
Supplies Used~
Stamp Set~ A Rose is A Rose, Teeny Tiny Wishes
Ink~ So Saffron, Soft Suede
Paper~ Soft Suede, So Saffron, Whisper White, So Saffron Prints Designer Series Paper
Acc.~Eyelet border Punch, Scallop Oval Punch, Large Oval Punch, Circle Scissor Plus, Glass Mat, Pretties Kit, White Organza ribbon, Sponge, Mat Pack, Paper Piercer, Dimensionals, Glue dots

Thanks for stopping in and have a great Friday!!!
Holly

09/09/2009

Hostess Set Level 2~ Asian Artistry

Hey all! Looks like I am back this morning Whaa Hooo!! Posting quick before I head out the door another busy day here.

The card I am sharing today uses Asian Artistry which is Level 2 Hostess Set. When I saw this set I had to have it! I really love it!! So how can you get this set?? Well I have a few options for you! 1. You can book a party and if you have $300 in sales before shipping and tax you have the chance to pick this set! 2. Have a book party and if you have $300 in sales before shipping and tax you have the chance to pick this set!!! 3. Join one of my clubs and when its your hostess month you can collect outside orders or have a party!! Just contact me to book a party, or join one of my clubs!
 
If you would like to purchase the supplies I used to make this project or place an order you can place an order
HERE, email or call me to!!

 Ok onto all the deets of this card :) The base of my is Basic Gray, then added a piece of Basic Black. I used some of our Nouveau Chic DSP item #115670 I sponged the edges with Basic Gray classic ink. Then I took some Basic Gray Taffeta ribbon and wrapped that around the middle. I placed a small grommet from our Basic Grommet Set in the lower right hand corner. Next I cut a strip of Basic Black and a Strip of Nouveau Chic DSP and layered them off to the left. Then I cut a piece of Basic Gray and using the mat pack and paper piercer I punched holes in the upper left hand corner.
 
I used Sage Shadow and Apricot Appeal Markers on the Stamp from Asian Artistry, then stamped on WW card stock and sponged the edges with Basic Grey Ink. I mounted this onto a piece of Basic Black and placed a silver brad in the upper left hand corner and then off set it on the Basic Gray card stock.

 


In the inside I cut a piece of WW card stock and using the Birthday saying from Sincere Salutations item #115068. I stamped it in Basic Gray. I took the dragon fly from the Asian Artistry Set and stamped it in Sage Shadow in the upper left hand corner. On the bottom I took some Nouveau Chic DSP and punched the edge out with Eyelet Border punch and then wrapped some Basic Gray Taffeta ribbon around it. I loved how this card turned out!

 

Supplies used~
Stamp Set~ Sincere Salutations, Asian Artistry
Ink~ Basic Gray, Sage Shadow
Paper~ Basic Gray, Basic Black, WW, Nouveau Chic DSP
Acc.~Eyelet Border Punch, Basic Gray Taffeta Ribbon, Silver Brads, Basic Small Grommets, Mat Pack, Paper Piercer, Sponge
Thanks for stopping by! Have a great day! Holly
Order Online

Holly's Clubs

Hostess Clubs


Rubber Redneck
Paper Pumpkin Club


Catalogs Specials
Etsy Store
Projects

web page visitor statistics

Site by: Pravus Media