Rubber Redneck

Color Round Up #26 using I Heart Hearts

(CRU #26)

Morning everyone!

Since St. Patty's Day is this week I decided this weeks color combo should be in honor of St. Patty's Day!!! Every Wednesday I will be posting a new Color Round Up Color Challenge!!! All color challenges will be based on Stampin' Up! color families. I am a Stampin' Up! Demo so all my samples will only use SU product.

To take part in the Color Round Up Color Challenge CRU #26~

1. Create a project (card, scrapbook page, 3D item or MDS item) using these colors or similar shades only on your project. You may use white or vanilla with this color challenge. I can't wait to see what you make!!!

2. Post it to your blog or other public gallery (Stampin' Addicts, Splitcoast and etc.) using the key words Color Round Up #26 or CRU #26 and make sure to include a link back here to the challenge.

3. Enter your name and direct link to your project in Mr. Linky box below!

The deadline is March 22nd so you have until March 22nd midnight central time to enter your project!! Join me for Color Round Up Color Challenge #26!! One winner will be picked and they will receive a badge to post on their blog!!! You can play along anytime for the color challenges but if you would like a chance at the badge you'll need to enter by March 22nd.

I used the following supplies to create this card~

I Heart Hearts Clear Mount Stamp Set item #118571
Teeny Tiny Wishes Stamp Set item #115370
Big Shot item #113439
Backgrounds 1 Texturz Plate item #114512
Brushed Gold Paper item #102935
Scallop Trim Border Punch item #118402
1/2 Pear Pizzazz Stitched-Poly Ribbon item #119265
Gold Brads item #104337
Glimmer Brads In Color item #121005

If you would like to purchase the supplies I used to make this project or place an order  shop ONLINE HERE, email or call me too!! Just click on the Shop Now button when on my Stampin' Up! Website.


My base is Wild Wasabi card stock. I cut a piece of Brushed Gold card stock. Using the Big Shot I ran the piece of Brushed Gold card stock through with the Background 1 Textuze Plate (small polk-a dot one). I then cut a piece of Wild Wasabi card stock, on the bottom I used the Scallop Trim Border Punch. I cut a piece of the DSP Pack In Color (Hostess Level 1) I took the stamp from Teeny Tiny Wishes Stamp Set; inked in Wild Wasabi and stamped onto the DSP. I snailed all those pieces together.

I cut a piece of Wild Wasabi, Pear Pizzazz and Brushed Gold card stock and snailed them together. I took the stamp from I Heart Hearts Stamp Set; inked in Wild Wasabi and stamped 4 Hearts onto Whisper White card stock. I then cut each one out and added a Stampin' Dimensional on the back; then attached it to the Brushed Gold card stock. In the center I placed an Glimmer Brad In Color. On the back of the completed piece I placed Stampin' Dimensionals. I cut a piece of 1/2 Pear Pizzazz Stitched-Poly Ribbon, folded it in half and attached to the back. I placed 3 Gold Brads under the St. Patrick's Day saying.

Supplies Used~
Stamp~ I Heart Hearts, Teeny Tiny Wishes
Ink~Wild Wasabi
Paper~ Wild Wasabi, Pear Pizzazz, Whisper White, Brushed Gold, Hostess Level 1 DSP Pack In Color
Acc.~ Big Shot, Backgrounds 1 Texturz Plates, Scallop Trim Border Punch, 1/2 Stitched-Poly Ribbon Pear Pizzazz, Gold Brads, Glimmer Brads In Color, Stampin' Dimensionals, Glue Dots

Thank you everyone who left comments on last weeks Color Round Up and to those that played along!! The winner of last weeks Color Round Up is Nicole!!! To see her beautiful creation please visit Nicole Stalker. Congrats Nicole!! Nicole won the Color Round Up Badge!!!

 

I can't wait to see what you all create with this color challenge!! Thanks for stopping by!

Holly

Happy St. Pattrick's Day!!

Top of the morning to you! Yep it is St. Patty's Day, were has this month gone? Wow!

To create today's card I used the Monday 3D challenge for my inspiration!
I used the following to create this card~

Big Shot item #113439
Magnetic Movers & Shapers Punch Windows item #115953
Embosslits Die Scalloped Heart of Hearts item #117332
Full Heart Punch item #113693
Modern Label Punch item #116630
Fresh Favorites I Buttons item #107421
1/4 Certainly Celery Grosgrain Ribbon item #109031
Teeny Tiny Wishes Stamp Set item #115370
Sanded Background Stamp item #109294

My base is Garden Green card stock. Then a piece of Certainly Celery card stock, I sponged Certainly Celery ink around the edges. Next I took a piece of Barely Banana card stock, using the Sanded Background I inked it in Barely Banana and then stamped onto the card stock. I sponged the edges with Barely Banana.

To create the clover I used the Big Shot and the Embosslit Scallop Heart of Hearts, I die cut 3 out in Garden Green. Using the Full Heart Punch I punched out 3 in Certainly Celery. I snailed them together, cut a strip of Garden Green card stock and then laid the hearts over the stem. To finish it off I added a Certainly Celery button from the Fresh Favorites I in the center.

At the bottom I used the Scallop Trim Border Punch on the Barely Banana card stock. I took some 1/4 Certainly Celery Grosgrain Ribbon and tied it around. Using the Big Shot and the Movers & Shakers Punch Windows I die cut a piece out in Garden Green card stock. I took the saying from Teeny Tiny Wishes Stamp Set stamped that in Garden Green ink on Barely Banana card stock and punched it out with the Modern Label Punch. I layered the two pieces together and added two gold brads to finish it off. I placed dimensionals on the back and the placed it over the bottom of the stem.

If you would like to purchase the supplies I used to make this project or place an order HERE, email or call me too!! Just click on the Shop Now button when on my Stampin' Up! Website



Supplies Used~
Stamp Set~Teeny Tiny Wishes, Sanded Background
Ink~Garden Green, Certainly Celery, Barely Banana
Paper~Garden Green, Certainly Celery, Barely Banana
Acc.~ Big Shot, Movers & Shakers Punch Windows, Embosslit Scalloped Heart of Hearts, Scalloped Trim Border, Modern Label Punch, Full Heart Punch, Fresh Favorites I Buttons, Gold Brads, 1/4 Certainly Celery Grosgrain Ribbon, Sponge Daubers, Stampin' Dimensionals, Glue Dots

Thanks for stopping in today hope you find your pot of gold :)
Holly

Monday's 3D Challenge~ St. Patty's Day Treat Holder

Top of the morning to you all!

Welcome to Monday's 3D Challenge! I posted this challenge over on the Stampin' Addicts website. Check out our other challenges and this rocking site! If your a demo be sure to sign up for the demo forums. Then pop in and say hi to me catrules. To celebrate St. Patty's Day I made a St. Patty's Day Treat Holder.

Directions~ I recommend watching the tutorial video for the directions.

1. Cut a piece of card stock 6" x 9" (Mine was Barely Banana card stock)

2. Score in 1" on both sides on the 9" side.

3. Flip the card stock and score 5" 6" and 8". Cut on the scored lines between the 5" and 6" to create tabs. This then will help you create tabs to form the bottom of your box.

4.Once the box is together then trim the upper sides how you would like.

I used the Sanded Background stamp item #109294, I inked it in Barely Banana then stamped on the Barely Banana card stock. Once I cut my tabs out at the bottom I used the Scallop Trim Border Punch. After the box was assembled I used Happy St. Patrick's Day stamp from Teeny Tiny Wishes item #115370.

To create the clovers, I used the Big Shot item #113439 with the Scalloped Heart Embosslits Die. I cut out 3 in Garden Green card stock, then using the Full Heart Punch I punched out 3 in Certainly Celery. I attached them to the wood stick with glue dots and then add a Fresh Favorites I button to the center of them. To make the coins. I took a Peppermint Patty. I punched out a piece in Brushed Gold with the 1 3/4 circle punch. I used the Go Go Boots Alpahbet item #113450 and die cut a dollar sign out in Garden Green I then attached all of this to the Peppermint Patty.

If you would like to purchase the supplies I used to make this project or place an order HERE, email or call me too!! Just click on the Shop Now button when on my Stampin' Up! Website




Here is the Tutorial Video

Supplies Used~
Stamp Set~ Teeny Tiny Wishes, Sanded Background
Ink~Barely Banana, Certainly Celery, Garden Green
Paper~ Barely Banana, Certainly Celery, Garden Green
Acc.~Big Shot,  Go Go Boots Sizzlets, Scalloped Heart Embosslit, SU Punch Windows, Scallop Trim Border Punch, Full Heart Punch, Modern Label Punch, Crimper, Mat Pack, Paper Piercing Tool, Gold Brads, Fresh Favorites I Buttons, 1/4 Certainly Celery Grosgrain Ribbon, Glue Dots, Stampin' Dimensionals.

Thanks for stopping in have a great Monday Morning!

Holly

Happy St. Patty's Day

Good Morning!

I hope everyone is having a great day! The card that I am sharing with you all today is what we made last night at my mystery hostess party! Thanks to all that came last night! I have a great group of gals and I sure laughed a lot last night! I think we all had a great time! My secret sister recently sent me her stamp set to borrow! How awesome is that! So I decided to use it and make a St. Patty's Day card. I must admit I have played with this set a lot and I think I am going to have to get it! lol

The stamp set I used is called Pinch Proof item# 115044 I took the clover stamp and stamped randomly around my two pieces of Basic Black cardstock in Versa Mark, I then pored Gold Embossing powder over it and heat set it. Then I layered a piece of Certainly Celery Cardstock, Brushed Gold Cardstock, and Basic Black Cardstock. For embellishments I added a punched out layered Pinch Proof image of to the left, ran some Certainly Celery 5/8 " Grosgrain Ribbon, I punched a hole through one of the shamrocks and added a Certainly Celery Brad to the center of it. Then stamped Happy St Patrick's Day in the center on Whisper White.

Supplies~
Stamp Set~ Pinch Proof

Ink~Basic Black, Certainly Celery, Versamark

Paper~ Basic Black, Whisper White, Certainly Celery, Brushed Gold

Acc~ 1 3/8 punch, Scallop Circle Punch, 1" Circle Punch, 3/4 Circle Punch, 1/16th hand Punch, SS Brads, Sponge,Dimensionals, Mini glue dots, Gold Embossing Powder, Powder Pal, Heat Gun, Embossing Gun, 5/8" Grosgrain Ribbon, Ticket Punch

Happy St. Patty's Day!

Holly

Monday's 3D Challenge using Always

Happy Monday Morning All!

I got some exciting news to share with you all! I will be posting the 3-D challenges on the Stampin' Addicts site! So every Monday I will have a new 3-d challenge for you to do! If you would like to visit the Stampin' Addicts site just click on the button on the right hand side of my blog!

I am having some computer problems and can't post pictures on my gallery over there so today I am posting the picture here first. So my first challenge is geared towards St. Patty's Day! You need to make a purse out of the mini nugget tins, design it for St. Patty's Day but not use any St. Patty's Day stamps! You'll need to think outside the box for this one! So this is what I came up with!

Rules~ (If uploading to the Stampin' Addicts site) 1.Only use SU Products 2. Put 3D001 SUO in your keywords when you upload 3. Have fun!

On the inside I covered the window with a piece of DSP Kiwi Kiss to cover the ribbon and all the misc. that you could see. Inside view.

Supplies Used~

Stamp Set~ Always

Paper~ Whisper White, DSP Kiwi Kiss

Inks~ Kiwi Kiss

Acc.~ Big Shot, Texture Impressions Pad, Texture Silicone Pad, Textured Backgrounds 1, Pretties Kit, Powder Pals, Dazzling Diamonds, 3/16th Corner Rounder Punch, Organza Ribbon Whisper White, Mini Glue Dots, Sticky Strip, Dimensionals

Thanks for stopping by!

Holly